Hitachi DH 14DL Handling Instructions Manual page 48
Hide thumbs
Also See for DH 14DL:
- Handling instructions manual (108 pages) ,
- Technical data and service manual (50 pages) ,
- Handling instructions manual (28 pages)
Table of Contents
Advertisement
English
When installing the carbon brush, choose the direction
so that the nail of the carbon brush agrees with the
contact portion outside the brush tube. Then push it in
with a fi nger as illustrated in Fig. 28. Lastly, install the
brush cap.
CAUTION
Be absolutely sure to insert the nail of the carbon
brush into the contact portion outside the brush
tube. (You can insert whichever one of the two
nails provided.)
Caution must be exercised since any error in this operation can result in the
deformed nail of the carbon brush and may cause motor trouble at an early stage.
6.
Cleaning on the outside
When the power tool is stained, wipe with a soft dry cloth or a cloth moistened with soapy
water. Do not use chloric solvents, gasoline or paint thinner, as they melt plastics.
7.
Storage
Store the power tool in a place in which the temperature is less than 40°C and out of reach
of children.
8.
Service parts list
CAUTION
Repair, modifi cation and inspection of Hitachi Power Tools must be carried out by
a Hitachi Authorized Service Center.
This Parts List will be helpful if presented with the tool to the Hitachi Authorized
Service Center when requesting repair or other maintenance.
In the operation and maintenance of power tools, the safety regulations and
standards prescribed in each country must be observed.
Important notice on the batteries for the Hitachi cordless power tools
Please always use one of our designated genuine batteries. We cannot guarantee the safety
and performance of our cordless power tool when used with batteries other than these
designated by us, or when the battery is disassembled and modifi ed (such as disassembly and
replacement of cells or other internal parts).
48
Contact portion
outside brush tube
Fig. 28
Advertisement
Chapters
Table of Contents
