Advertisement
ingilizce-2.FH11 6/7/05 12:14 PM Page 5
Introduction
Because your 27" - 30" LCD-TV equipment is
provided with VGA inputs, it may be used as a
PC monitor as well. (Plug&Play)
Transition to the PC mode
To change your LCD-TV into monitor
(PC) mode you have to press 6 times
the "
or press the OK button to select the PC
choice in the line-up menu on screen
and press OK to access it directly. To
change back from the PC mode to the
TV mode use the EXIT button on the
remote control.
" button on the remote control
ENGLISH -21-
PC Input Setting
While in PC mode, use the down (
button in the Setup menu to select the
PC Input Setting and press "OK" or
left/right ( /
) .The PC Input Setting
–
+
menu will be on screen. In this menu
you can make the desired changes with Left-
right, Up-down motion ( /
–
on your remote control.
H.Position: Horizontal position setting.
V.Position: Vertical position setting.
Phase: ADC's phase setting.
Automatic configuration: The most suitable
geometric settings in accordance to the entry
mode is configured by this function. For this
a p p l i c a t i o n , c h o o s e t h e A U T O M A T I C
CONFIGURATION option and press the OK
button.
PC Input Setup
Hor. Position
Ver. Position
Phase
Auto Position
Back
WatchTV
)
) ( /
) buttons
+
Advertisement
