17. Select "Save changes and reset" from the [Save & Exit] menu.
Note
Do not select "Save changes and exit."
This completes the setup of the normal startup method.
The unit reboots, and displays the Sony logo screen. Check that the message shown in step 12
is not displayed. If the message is not displayed, the normal startup method has been correctly
configured.
If the message is displayed, follow the procedure again from step 13.
Pod
Refer to the Windows manual or computer manufacturer's manual, and follow the recovery
procedure.
Resetting the Vision Exchange administrator password
Main Unit and Pods
If you forget the Vision Exchange administrator password required to display the
[Administrator Menu] in Vision Exchange, contact your Sony sales or service representative.
Note
Sony maintains emergency passwords to respond to lost passwords.
Sony will not log in to your system using an emergency password without your express
permission.
97