APPENDIX 1 SPECIFICATIONS
The figure below shows the effective print area on the media.
1.5mm from the left edge of media
NOTES:
1. Be sure not to print on the 1.5-mm wide area from the media edges (shaded area in the above figure).
2. The centre of media should be positioned at the centre of the print head.
3. Print quality is not guaranteed within 3 mm from the print head stop position (including 1-mm slow-up.)
4. Average print (black) rate should be 15% or less. For bar code print area, the print rate should be 30% or less.
5. Line weight should be 3 to 12 dots.
Start line
1mm
Guaranteed print area
1mm
(Backing paper width is not included.)
Media width
EA1- 6
ENGLISH VERSION EO1-33088
1.5mm from the right edge of media
Media feed direction
A1.3 Media