Maintaining And Repairing The Device; General Information On Maintenance And Servicing; Cleaning; Cleaning The Device - Siemens IFP1900 INOX PRO Compact Operating Instructions

Hide thumbs Also See for IFP1900 INOX PRO:

Table of Contents

Maintaining and repairing the device

5.1

Observe the following when servicing and repairing protective equipment e.g. such as

ground circuits or overvoltage protection components:

● Observe the maintenance and replacement intervals.

● Replace system components, including external cables, fuses and batteries only with

equivalent components approved by the respective manufacturer.

5.2

5.2.1

The device is designed for low-maintenance operation. However, it is still necessary to clean

the device regularly.

Clean the entire device thoroughly:

● Before commissioning

● As required, depending on the degree of contamination

● At regular intervals (according to an internal cleaning plan)

Unwanted reactions when cleaning the device

You risk unintentional actuation of operator controls if you clean the device while it is

switched on.

You may possibly trigger unwanted actions of the device or controller that are liable to

cause personal injury or damage to the machinery.

Always switch off the device before you clean it.

Cleaning Agents

NOTICE

Damage to the device due to impermissible cleaning agents

Impermissible and unsuitable cleaning agents can cause damage the device.

Use dish soap or foaming screen cleaner only as cleaning agents.

Do not use aggressive solvents or scouring powder.

CAUTION

Compact Operating Instructions, 07/2019, A5E35751632-AC

IFP1900 INOX PRO

Table of Contents