Commissioning The Hmi For Ctrl-E Analysis; Changing Display Texts Of The Auxiliary Systems - Siemens SINUMERIK 840D sl Ctrl-Energy System Manual
Hide thumbs
Also See for SINUMERIK 840D sl Ctrl-Energy:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
3.4
Commissioning the HMI for Ctrl-E Analysis
No additional adaptation is required.
As soon as the DB1001 (840D sl) or the DB9907 (828D) is available and actively assigned
with data words, then the HMI automatically accepts this data.
If you have configured auxiliary systems, these devices are displayed as "AUX1" to "AUX10"
in the Ctrl-E analysis. You can assign these devices language-dependent display texts.
3.4.1
Changing display texts of the auxiliary systems
The display texts for the auxiliary systems are stored in the "slnrgauxunits_xxx.ts" file. A
dedicated file must be created for each supported language. The file names differ by the
language code. Set the appropriate language code for "xxx" (e.g. "slnrgauxunits_eng.ts" for
English).
Structure of the "slnrgauxunits_xxx.ts" file
In the "slnrgauxunits_xxx.ts" file, the text identifiers from the software are assigned language-
dependent texts.
Tag
source
translation
chars
lines
Procedure
1. Copy the "slnrgauxunits_deu.ts" template file from the directory: siemens/sinumerik/
hmi/template/lng.
2. Save the file to the /oem/sinumerik/hmi/lng or /user/sinumerik/hmi/lng
directory.
3. If required, change the file name.
If you wish to create texts for additional languages, then a separate file must be created
for each language. Save the file with the appropriate language code in the file name.
4. Open the file and enter the text to be displayed between the <translation> and </translation>
tags.
5. Restart SINUMERIK Operate.
The file must still be converted into a binary format so that the texts can be displayed during
the program runtime. This conversion is only executed when the HMI powers up.
Ctrl-Energy
System Manual, 01/2015, 6FC5397-0EP40-5BA2
3.4 Commissioning the HMI for Ctrl-E Analysis
Meaning
Text identifier
The auxiliary systems are identified with "AUX_UNIT_1" to
"AUX_UNIT_10".
Text which is displayed on the user interface.
You can enter single and multi-line texts. "%n" is used to generate a line
break.
Text length (number of characters)
Number of lines
Ctrl-E Analysis
37
Hide quick links:
Advertisement
Table of Contents
