Advertisement
HDMI
connections
to some
Panasonic
equipment
allow
you
to interface
automatically.
• This function
may not work normally
depending
on the
equipment
condition.
• The equipment
can be operated
by other equipment's
remote
controls
with this function
on even if this Projection
Display
is in Standby
mode.
• Image
or sound
may not be available
for the first few
seconds
when the playback
starts.
• Image
or sound
may not be available
for the first few
seconds
when
Input mode
is switched.
• Volume
function
will be displayed
when adjusting
the
volume
of the equipment.
• If you connect
the same kind of equipment
at once (for
example:
one DIGA to HDMI 1 / another
DIGA to HDMI 2),
EZ Sync TM is available
for the terminal
with the smaller
number.
• If you connect
the equipment
that has "HDAVl
Control
2"
function
to the TV with HDMI cable,
the sound from
DIGITAL
AUDIO
OUT terminal
can be output
as
multi-channel
surround.
PFOCe([ldre
1. Press
A V to select
"EZ Syne setting".
2. Press OK to display
the EZ Sync setting
menu,
Item
'
Explanations
Controls
equipment
connected
to HDMI terminal.
EZ Sync
(p. 52-53)
• "Power off link", "Power on link", and "Default
speakers"
cannot be selected
if "Off" is set.
When "Set" is selected
and this Projection
Display
is turned off, all connected
EZ Sync compatible
equipment
is also automatically
turned off.
Power off
• DIGA (Panasonic
DVD Recorder)
will not turn off if
link
it is still in rec mode.
Caution:
• This Projection
Display remains on even if the EZ
Sync compatible
equipment
is turned off.
When "Set" is selected,
this Projection
Display
is turned on automatically
and switches
to the
appropriate
HDMI input whenever
EZ Sync
Power on
compatible
equipment
is initially turned on and Play
mode is selected.
link
• While the power lamp is blinking, the picture
cannot be seen.
• Power on link will not work until lamp cooling is
completed
when power is turned off.
"TV" is the default setting.
To set the Home theater
Default
system as default speakers,
change the default
speakers
speakers
setting from "TV" to "Theater".
Sound will
be output from the Home Theater
whenever
this
Projection
Display
is powered
on.
3. Press
A T to select
"EZ Sync".
4. Press
_i_
to select "On".
• Default
setting
is "On". If no HDMI devices
are connected
or standard
HDMI
(without
"EZ Sync")
is used, set to "Off".
5. Press
A T to select each
item.
6. Press
4 _, to select
the setting.
At the start of the DIGA, Player theater,
or RAM theater
playback,
this Projection
Display's
input automatically
switches
to the input based on the playback
equipment.
• For the RAM theater, the speakers automatically switch to the
theater system.
If using the DIGA operation, this Projection Display's input
automatically switches to the DIGA and DIGA menu is
displayed.
You can select Home theater, or TV speakers for audio
output.
Control theater speakers with this Projection Display's
remote control.
This function is available only when Panasonic Amplifier
or Player theater is connected.
Procedure
1. Press EZ Sync to display
the EZ Sync
menu.
53
Advertisement
