Table of Contents
Advertisement
■
To turn the power ON/OFF with the remote
control
To turn the power on
●
When the power of the unit is on (Power Indicator -
red), press <POWER ON button ( )> then the picture
will be displayed.
●
Power Indicator: Green (Picture is displayed.)
To turn the power off (Standby condition)
●
When the power of the unit is on (Power Indicator -
green), press <STANDBY button ( )>, then the power
will be turned off.
●
Power Indicator: Red (standby)
Note
●
After the power plug is disconnected, the power
indicator may remain lit for a while. This is not a
malfunction.
●
Press the <Power button ( ) (Unit)> on the unit to
turn the unit off, when the power of the unit is turned
on or in standby mode.
■
When the Unit is turned on for the first time
Following screen will be displayed.
Important:
Please read carefully.
This product's power save mode has been set to enable (low power mode)
before shipping. (To reduce power consumption in standby mode)
During power standby at low power mode settings:
- LAN function cannot be used.
Are you sure you want to use low power mode?
Please select "YES" if you agree with this condition.
Yes
■
Power save mode
When this TV is turned on for the first time after being
shipped from the factory, the power save mode setting
screen will be displayed.
[Yes]: T he TV᾿s consumption in standby mode is
reduced. However, the startup time from standby
mode becomes longer.
[No]: It is reduced that startup time from standby
mode. However, more power will be consumed in
standby mode.
Even after being set, you can change the "Power save
mode". (see page 41)
Select the signals input to the unit.
Press <INPUT> or <INPUT (Unit)>.
No
[TV]:
[HDMI1]: HDMI 1 terminal, HDMI input
[HDMI2]: HDMI 2 terminal, HDMI input
[PC]:
[USB]:
Selecting the input signal
Input
TV
HDMI1
HDMI2
PC
USB
Move
Antenna terminal
PC Input Terminal
USB terminal, USB input
Unit
Select
ENTER
English
27
Hide quick links:
Advertisement
Table of Contents
