Maintenance And Inspection - Hitachi FS 10SA Handling Instructions Manual
Orbital sander
Hide thumbs
Also See for FS 10SA:
- Instruction manual and safety instructions (20 pages) ,
- Handling instructions manual (14 pages) ,
- Handling instructions manual (27 pages)
Advertisement
MAINTENANCE AND INSPECTION
1. Inspecting the sanding paper
Since use of worn-out sanding paper will degrade
effi ciency and cause possible damage to the pad,
replace the sanding paper as soon as excessive
abrasion is noted.
2. Inspecting the mounting screws:
Regularly inspect all mounting screws and ensure that
they are properly tightened. Should any of the screws
be loose, retighten them immediately. Failure to do so
could result in serious hazard.
3. Maintenance of the motor
The motor unit winding is the very "heart" of the power
tool. Exercise due care to ensure the winding does not
become damaged and/or wet with oil or water.
4. Servicing
Consult an authorized Service Center in the event of
power tool failure.
NOTE
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
English
5
Advertisement
