Table of Contents
Advertisement
2 Interface Cable (I Cable)
You can connect the I Cable supplied in the consignment to this port.
The I Cable enables the connection to S5 automation devices (COM1/TTY), to
devices with a serial port (COM2/standard V.24) such as a modem or mouse and
to devices with a parallel port (standard LPT) such as a printer or scanner. Please,
use the I Cable on a level surface only (e.g. desk) to prevent contact problems.
Caution
!
Only the I Cable may be connected to this port. If you connect other devices with a
50-pin mini SCSI connectors, your Field PG P4 or the connected device may be
damaged as a result.
3 Ethernet
RJ45 Ethernet connector. Ethernet is a local area network with a bus structure for
data communication with a data transfer rate of 10/100 Mbit per second (Mbps).
4 MPI/DP Multipoint Interface
The MPI/DP interface is isolated from line potential. You can use it to connect the
SIMATIC Field PG P4 to an S7 automation system or to a PROFIBUS network.
5 VGA
Here you can connect an appropriate external monitor.
Caution
Make sure the monitor can handle the resolution and refresh rate settings.
Otherwise, it can result in damage.
6 USB
Second USB port 2.0.
7 DC In 17.5 V
Socket for the DC output plug of the power supply that is included in your
consignment.
SIMATIC Field PG P4 Manual
A5E00180080-04
Getting Familiarized with the SIMATIC Field PG P4
LPT
COM2/V.24
S5 Online AG (COM1/TTY)
2-5
Hide quick links:
Advertisement
Table of Contents
