Lap Timing - Bosch C 70 Manual

Hide thumbs Also See for C 70:

Table of Contents

14.3 Lap timing

14.3.1 Time based retrigger protection

14.3.2 Distance based retrigger protection

Bosch Motorsport

[###03] indicates: 'always use 3 digits with leading zeros'.

There are different possibilities to adjust the lap trigger to the timing situation.

The detection time defines the minimum time the input signal changes its state. E.g. a low

active signal needs to be below the threshold for min. 15 ms to release the trigger.

Channels for display

To display lap times use the following channels:

Channel

Laptrigger_lapctr_dls

Laptrigger_laptime_dls

Laptrigger_laptime_best_dls

Laptrigger_laptimeold_dls

Laptrigger_laptimeseg_dls

Laptrigger_lapctr_dls

Trigger is locked for 5 s after main trigger was received.

To deactivate time based retrigger protection, set 'Retrigger lock time' to 0 ms.

Define settings for lap timing

(main trigger).

Define settings for sub trigger.

Not applicable with a GPS lap trigger.

5000ms

Main Trigger

Trigger is locked until configured min distance (i.e. 80 % → 3200 m) of track distance (i.e.

4000 m) has been covered. To deactivate distance based retrigger protection, set min dis-

tance to 0 %.

Data Logger C 70 Manual

Function

Number of completed laps

Running laptime

Laptime of best lap

Laptime of last lap completed

Segment time of last segment

Number of completed laps

Lap Trigger | 14

91 / 112

Table of Contents