Table of Contents
Advertisement
9 745 PC SOFTWARE
9.3 USING 745PC
Saving setpoints to a file on the local PC is accomplished as follows:
1. If the local PC is not connected to a 745 relay, select the File > Properties menu item. The dialog box
shown below appears, allowing for the configuration of the 745PC program for the options ordered for a
particular 745 relay. 745PC needs to know the correct options when creating a setpoint file so that set-
points that are not available for that particular relay are not downloaded.
2. Select the installed options from the drop down menus. After configuration, select the File > Save As
menu item. This launches the following dialog box. Enter the file name under which the file will be saved in
the File Name box or click on any of the file names displayed. All 745 setpoint files should have the exten-
sion .745 (for example, xfrmr01.745). Click OK to proceed.
3. The program reads all the relay setpoint values and stores them to the selected file.
GE Power Management
Figure 9–8: FILE/PROPERTIES DIALOG BOX
Figure 9–9: SAVING SETPOINTS
745 Transformer Management Relay
9.3 USING 745PC
9.3.1 SAVING SETPOINTS TO A FILE
9
9-7
Advertisement
Table of Contents
