1. Use the mounting template to cut an entry hole for the camera and cables into the ceiling.
2. Use a No. 2 Phillips screwdriver to push each of the clamps into the camera. Push the clamp down
until the spring is fully compressed, then rotate the clamp counter clockwise into the ready position.
3. Insert the sealing grommet with all the required cables pulled through into the cable entry hole on the
bottom of the camera. For more information on using the sealing grommet, see
through the Sealing Grommet on
4. Insert the dome camera into the entry hole in the ceiling.
5. Rotate the clamps clockwise and release to secure the camera to the ceiling.
Mounting the Dome Camera Using the Ceiling Clamps
page 20.
Inserting Cables
28