Table of Contents
Advertisement
DOK-SUPPL*-VEH*30.2***-PR03-EN-P
Rexroth IndraControl VEH 30.2 Hand-Held Terminal
2.4.2
Areas of Use and Application
Important Instructions on Use, Target Group and Purpose of the Document
Bosch Rexroth disclaims as manufacturer any warranty, liability or
damages occurring due to inappropriate use of the products. Fur‐
thermore, Bosch Rexroth is not paying any compensation; the
user is responsible for any risks resulting from inappropriate use
of the products.
Before using Bosch Rexroth products, the following requirements must be
met to ensure appropriate use of the products:
●
Anyone handling one of the Rexroth products in any way has to read
and understand the respective safety-related guidelines as well as the
instructions on appropriate use.
●
Hardware products have to remain in their original state, i. e. no modifi‐
cation regarding the design is allowed. Software products must not be
decompiled and their source codes must not be modified.
●
Damaged or faulty products must not be implemented or put into opera‐
tion.
●
It must be ensured that the products are installed as specified in the
documentation.
The IndraControl VEH 30.2 Hand-Held Terminal is a PC-based operating and
visualization device that can also fulfill control functionalities, depending on
the application or configuration.
NOTICE
The IndraControl VEH 30.2 Hand-Held Terminals may exclusively be used
with the accessories and add-on components specified in this documentation.
Components not named expressly mentioned must neither be mounted nor
connected. The same applies to cables and conduits.
The products may only be operated with the expressly stated configurations
and component combinations as well as with the software and firmware
which given and specified in the respective functional description.
The IndraControl VEH 30.2 Hand-Held Terminal was developed for control
tasks.
Typical areas of application of the IndraControl VEH 30.2 Hand-Held Termi‐
nal are:
●
Handling systems and assembly systems
●
Packaging and food processing machines
●
Printing machines and paper converting machines
●
Machine tools
The devices of the IndraControl VEH 30.2 design may only be operated un‐
der the assembly conditions and installation conditions, in the specified posi‐
tion of application and under the specified ambient conditions (temperature,
degree of protection, humidity, EMC etc.) given in this documentation.
Bosch Rexroth AG
Danger of destruction of the device if not ex‐
pressly stated accessories, add-on compo‐
nents and other components, cables, con‐
duits, software and firmware is used.
13/109
Advertisement
Table of Contents
