Panasonic SF4D Series Instruction Manual page 2
Io-link communication unit
Hide thumbs
Also See for SF4D Series:
- Instruction manual (176 pages) ,
- Quick instruction manual (4 pages) ,
- Quick instruction manual (7 pages)
Advertisement
7
INTERNAL CIRCUIT
● Circuit Configurations
Main light curtain com-
munication circuit
Power
supply
circuit
1
2
+V
3
4
5
Synchronization+
6
Synchronization-
7
0V
8
【SENSOR_IN】
Light curtain side
Note: 1) The main light curtain communication circuit is isolated from the main IO-Link circuit inside the product.
8
MOUNTING
● Observe the following tightening torque when installing the product: 5.5 N∙m max.
for M8 bolts or 2.5 N∙m max. for M6 bolts. Mount the product using two bolts as
shown in the diagram below.
● Mount the product in place before connecting connector cables.
● The product may be installed in any orientation or direction. Be sure to connect
the cables securely to prevent communication errors resulting from loosening or
detaching of cables or connectors due to its installation direction.
M8 bolt
Using M8 bolts for installation
(Use larger holes located toward the inside)
9
CONNECTION
● Turn OFF the power to the light curtain and IO-Link master unit before connecting
the product to the light curtain and IO-Link master unit.
● Various types of cable are available as optional parts for SF4D Series light cur-
tains. For details, visit our website (https://panasonic.net/id/pidsx/global).
Connection to light curtain
＜When using the product by connecting it to the receiver side of light curtain＞
1. Connect the connector (plug side) on the 8-core bottom cap cable or 8-core ex-
tension cable connected to the light curtain's receiver to this product's 8-core con-
nector (socket side) located on the light curtain communication side.
8-core connector
(plug side)
Light curtain's
receiver
8-core connector
(socket side)
2. Connect the connector (socket side) on the 8-core extension cable to this prod-
uct's 8-core connector (plug side) on the light curtain communication side.
3. Connect the 8-core extension cable connected in the above step 2 to the external
device (PLC), power supply and light curtain's emitter.
Isolation (Note:1)
IO-Link
1
Power
supply
circuit
4
Main IO-Link circuit
1
2
【CTRL_OUT】
Internal circuit
M6 bolt
Using M6 bolts for installation
(Use smaller holes located toward the outside)
8-core connector
(socket side)
8-core connector (plug side)
PLC, power
supply and
light curtain
＜When using the product by connecting it to the emitter side of light curtain＞
1. Connect the connector (plug side) on the 8-core bottom cap cable or 8-core ex-
tension cable connected to the light curtain's emitter to this product's 8-core con-
nector (socket side) located on the light curtain communication side.
+V
2
N.C.
3
0V
C/Q
Light curtain's
emitter
+V
3
4
5
Synchronization+
2. Connect the connector (socket side) on the 8-core extension cable to this prod-
6
Synchronization-
uct's 8-core connector (plug side) on the light curtain communication side.
7
0V
8
Controller side
3. Connect the 8-core extension cable connected in the above step 2 to the external
device (PLC), power supply and light curtain's receiver.
＜Terminal layout of connector on light curtain communication side＞
Socket side
【SENSOR-IN】
Terminal arrangement for connection of receiver side
Terminal No.
1
Control Output 2(OSSD2)
2
24V DC
3
Control Output 1(OSSD1)
4
External device monitor input
5
Synchronization +
6
Synchronization -
7
0V
8
Output polarity setting / Lockout release input
Terminals arrangement for connection of emitter side
Terminal No.
1
Interlock setting input
2
24V DC
3
Test / Reset input
4
Auxiliary output
5
Synchronization +
6
Synchronization -
7
0V
8
Output polarity setting / Lockout release input
Connection to IO-Link master unit
Connect the M12 connector cable (optional) for communication with IO-Link master
unit to this product's connector on the IO-Link communication side.
＜Terminal arrangement of M12 connector type＞
2
1
3
4
10
LIGHT CURTAIN SETTING DATA COPY FUNCTION
● This function reads the setting data stored in the light curtain and copies it in the
product's internal memory (nonvolatile memory).(You can not create and save
data file for external back up.)
● When the light curtain is replaced during maintenance or for other reasons, the
setting data stored in the product's internal memory can be written to the newly
installed light curtain. This facilitates the setting work and also prevents setting
errors.
Note ) This function cannot be used unless the product is connected with the IO-Link master unit and is able to use IO-
Link communication. For detailed information, see [
8-core connector
(plug side)
8-core connector
(socket side)
Plug side
【CTRL-OUT】
Functions
Functions
Terminal No.
Terminal Name
Functions
1
Power +V
＋V
2
N.C.
-
3
0V
Power 0V
4
C/Q
IO-Link communication
SERVICE
DATA(SD)].
15
8-core connector
(socket side)
8-core connector
(plug side)
PLC, power
supply and
light curtain
･ Recommended connection cable
"A Coding" cable manufactured
by TE Connectivity
(IEC-61076-101)
Advertisement
