Carry/Borrow Resetting
Figure 62 – Example of Carry/Borrow Resetting
The above figure shows the example of Carry/Borrow resetting program used during
•
counter operation.
The Carry/Borrow is reset (or cleared) by setting the specified bit of %U address
•
area.
Auxiliary Mode Setting
1.
Count clear: Figure 64 shows the example of setting Auxiliary Mode to 1 (count
clear) through I/O Parameters.
Figure 65 shows the example of the scan program with Auxiliary Mode set to 1
(count clear) and Auxiliary Mode operation enabled.
Figure 63 – Parameter Setting Screen for Auxiliary Mode1
R200
2MLF-HO2A, 2MLF-HD2A High Speed Counter Module User's Guide
May 2010
Honeywell
7. Programming
7.4. Basic Program
125