Siemens SINUMERIK 840D sl Function Manual page 124
Sinumerik integrate amb, amc, amm
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
3 Setting up functions
3.4 Fault services
Function
Conditions AND-linked (x)
Absolute address
ePS-Var
Generic
NC
PLC
SINAMICS
Operation
Comparison
value
or
Comparison
address
3-124
Description
BOOL, BYTE; CHAR; DINT; DWORD; INT; REAL;
STRING; WORD - the address expression must
be directly entered.
REAL, STRING - the address expression must
directly be entered.
Traversing path, traversing distance rapid
traverse, traversing time, traversing time jerk,
traversing time rapid traverse, traversing
operations, traversing operations jerk, traversing
operations rapid traverse, jerk, motor temperature
- for each configured NC axis - no additional input
is required.
REAL - direct input or selection from the list of
user-defined variables.
The system supports plausibility for the absolute
addresses, their data types, or the possible
comparison operations. If necessary, the user
must adjust the interpretation variants of a data
format so that they are compatible with the
comparison value (BCD, ASCII, etc.).
Only the operations possible for an address type
are available.
The following are possible: =, ≠, >, <, ≥, ≤, IN,
OUT.
The operations are applied according to their
mathematical significance.
IN is a comparison with two different comparison
values, whereby the condition is fulfilled if the
value lies within the two values.
OUT is a comparison with two different
comparison values, whereby the condition is
fulfilled if the value lies above the higher of the
two values and below the lower of the two values.
Any value in the format, which matches the
absolute address.
See: Absolute address
User-defined variable, generic variable, NC
variable, NC, PLC variable, SINAMICS variable -
defined in the formats described under absolute
address.
For each condition, the complete comparison
expression can be saved in order to be able to
insert it at another corresponding position.
A complete comparison expression can be
deleted for each condition.
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
© Siemens AG 2006-2013 All Rights Reserved
03/2013
Type
DISPLAY
INPUT
DISPLAY
INPUT
DISPLAY
DISPLAY
INPUT
DISPLAY
INPUT
DISPLAY
SELECTION
INPUT
DISPLAY
SELECT-
ACTION
ACTION
Hide quick links:
Advertisement
Table of Contents
