Table of Contents
Advertisement
Navigator 500
Sodium analyzer
3.1.3 Mounting the wet-section
Refer to Fig. 3.2 for wet-section dimensions. The wet-section weighs 4.5 kg (10 lb) – excluding bottle carrier and solutions.
Note. Clearance – the enclosure doors can open 180°. If mounting in a confined area, allow sufficient clearance for
door opening.
Dimensions in mm (in.)
384.8
(15.15)
2 Holes Ø 7
(0.27)
210 (8.27)
37 (1.45)
*When installing, allow a further 60 mm (2.36 in.) min. to remove the bottle carrier assembly,
or 135 mm (5.31 in.) min. to remove the calibration solution bottle from the carrier.
Fig. 3.2 Sodium wet-section dimensions
Referring to Fig. 3.3:
1. Mark the wall using the dimensions shown.
2. Drill and plug 3 holes
1
M6 or
/
in. fixings.
4
3. Screw in top fixing
(0.78 in.) between the fixing head and the wall.
4. Hang the wet-section onto fixing
wet-section is retained firmly against the wall.
Note. It is not possible to adjust fixing
wet-section is placed over it.
5. Secure the wet-section to the wall using 2 fixings
OI/ASO550–EN Rev. G
Ø 7 (0.27)
480
(18.90)
80.2 (3.15)
110.5
110.5
110.5
(4.35)
185
185
185 (7.28)
A
B
and
in the wall suitable for
A
, leaving a gap of 20 mm
A
, ensuring the
A
once the
B
281
(11.06 in.)
Dimensions in mm (in.)
386
(15.19)
.
Fig. 3.3 Mounting the wet-section
3 Installation
Navigator 500
18
(0.7)
290
218.7
218.7
(11.41 in.)
210 (8.27)
9
- Quick Links:
- Appendix D - Spare Parts and...
Hide quick links:
Advertisement
Table of Contents
