Warning indicators and messages
Alarm Messages
The following alarm messages will appear together with the alarm indicators. Take corrective action according to
the displayed message.
Item
Message
% Z Moisture condensation. Eject the cassette.
Moisture
condensation
% Moisture condensation. Turn off for 1H.
Q Insert a cassette.
Cassette/Tape
Z Reinsert the cassette.
Q Z The tape is locked -check the tab.
Q The tape has reached the end.
Cannot add audio. INPUT SELECT is set to HDV/DV
Audio dubbing
Not recorded in DVCAM mode. Cannot add audio.
Cannot add audio.
Cannot add audio on the blank portion of a tape.
HDV recorded tape. Cannot add audio.
Cannot add audio. "HDV/DV SEL" is set to HDV.
Cannot record due to copyright protection.
Others
Change to correct tape format.
No output image in "HDV/DV SEL". Change format.
Dirty video head. Use a cleaning cassette.
x
Unplug power cable.
Reinsert the cassette.
Invalid input signal.
Power voltage error.
88
Chapter 6 Maintenance
Cause/Corrective Action
t See page 91 for details.
t See page 91 for details.
t See page 31.
• Check for damage on a tape or other
irregularities.
t See page 30.
—
—
—
• You cannot add audio unless the recorded
audio format is 32 kHz (4-channel, 12 bit).
Make sure that [60i/50i SEL] in [OTHERS]
menu is set correctly..
—
—
—
—
• This is an unsupported format and cannot be
played back.
Stop playback or signal input, or change
[HDV/DV SEL] setting (page 67) .
t See page 89.
—
—
The signal that has been input to the unit is
invalid. Check the input signal.
—