Meter Data In Detail - Siemens Synco OZW772 Series Commissioning Instructions
Web server v6.0 for synco system
Hide thumbs
Also See for Synco OZW772 Series:
- Installation instructions manual (12 pages) ,
- Installation instructions manual (52 pages) ,
- Basic documentation (88 pages)
Table of Contents
Advertisement
Meter data
Meter exchange
Notes
QAX / Synco 700 data
Note
QAX / Synco 700
mapping
Note
Siemens
Building Technologies
Meter data is mapped in the Web Server based on information from Synco devices
entered and generated under Device web pages.
The entire data set for the meter is moved when replacing a meter from the "Meter
data" area to "Meter replacement".
In generation, the "Meter replacement" function ensures that last available values
for any meter is retained even for billing purposes even after replacement.
· The entire "Meter replace" area can be deleted (see Section 2.5.3.6,
"Consumption data").
· 2-year old data is deleted automatically.
6.1.2
Meter data in detail
Key for data fields:
A
Web Server data (plant)
B
Device information
(incl. meter name)
C
Meter information
(excl. meter name)
D
Current values
E
Meter state
Data for device information, including meter name (data field B) are mapped to
the Web Server based on information from the Synco devices immediately after
generating.
Must be re-generated if settings are changed to integrated Synco devices.
Meter information, not including meter name (data field C), current values (D),
meter status (E), last due date (F1) and calendar monthly values (G) are collected
at the QAX9... or on the Synco 700 controller (not E and not F1) and then retrieved
by Web Server.
Data in the section on meter status (E) are specific to the manufacturer for M-bus
meters.
Web server OZW772... V6.0
Record consumption data
F1
Last due day
F2
Last but one due day
G
Calendar monthly values
H
Start value Web Server
T
Header
U
Information lines
V
Footer
75 / 176
CE1C5701en
2015-10-12
Hide quick links:
Advertisement
Table of Contents
