Table of Contents
Advertisement
AM tuner section
Tuning range
Area code
CEL, CEK, ECE
AU, E51
Antenna (aerial)
Intermediate frequency
5)
You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down TUNING
MODE, press POWER on the receiver. All preset
stations will be erased when you change the tuning
scale. To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure.
Video section
Inputs/Outputs
Video:
COMPONENT VIDEO:
General
Power requirements
Area code
Power requirements
CEL, CEK, ECE
230 V AC, 50/60 Hz
AU
240 V AC, 50 Hz
E51
120/220/240 V AC, 50/60 Hz
98
GB
Tuning scale
10 kHz step
9 kHz step
–
531 kHz –
1,602 kHz
530 kHz –
531 kHz –
5)
1,710 kHz
1,710 kHz
Loop antenna
450 kHz
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
P
/C
: 0.7 Vp-p, 75 ohms
B
B
P
/C
: 0.7 Vp-p, 75 ohms
R
R
80 MHz HD Pass Through
Power output (DIGITAL MEDIA PORT)
DC OUT:
Power consumption
Area code
CEL, CEK, ECE,
AU, E51
5)
Power consumption (during standby mode)
Dimensions (width/height/depth) (Approx.)
Mass (Approx.)
Supplied accessories
Operating instructions (this manual)
Quick Setup Guide (1)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Remote commander (RM-AAP022) (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
For details on the area code of the
component you are using, see page 3.
Design and specifications are subject to
change without notice.
5V, 0.7 A MAX
Power consumption
230 W
0.7 W
(When "CTRL:HDMI" in
HDMI menu is set to
"CTRL OFF")
430 × 157.5 × 318 mm
including projecting parts
and controls
8.4 kg
Advertisement
Table of Contents
