HP EliteDesk 800 G3 Disassembly Instructions Manual page 2
Tower business pc
Hide thumbs
Also See for EliteDesk 800 G3:
- Maintenance and service manual (165 pages) ,
- Hardware reference manual (65 pages) ,
- Disassembly instructions manual (10 pages)
Advertisement
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Screwdriver
Micro shear
Screwdriver
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Loose the screw and remove access panel.(see Figure 1 below)
2.
Rotate the driver cage form the hook on slide rail.(see Figure 2-6 below)
3.
Disconnect FIO cables from the MB.(see Figure 7-9 below)
4.
Disconnect HDD SATA cables from the MB.(see Figure 10 below)
5.
Disconnect other PSU cables from the MB.(see Figure 11 below)
6.
Remove ODD SATA/power cable.(see Figure 12-13 below)
7.
Remove the memory from MB.(see Figure 14 below)
8.
Remove ODD from chassis.（see Figure 15-16 below）
9.
Remove FIO/PSU/Speaker/SATA power/system fan cables from the MB.(see Figure 17-24 below)
10. Remove system fan from chassis.(see Figure 25 below)
11. Remove the heatsink from MB.(see Figure 26-27 below)
12. Separate the fan from CPU heatsink .(see Figure 28-29 below)
13. Remove the CPU from the MB(see Figure 30-31 below)
14. Remove the battery from the MB.(see Figure 32 below)
15. Remove M/B from chassis.(see Figure 33-34 below)
16. Remove front panel from chassis.(see Figure 35 below)
17. Remove FIO/Speaker from chassis.(see Figure 36-38 below)
18. Rmove HDD from HDD cage.(see Figure 39 below)
19. Remove PSU cover.(see Figure 40-46 below)
20. Disconnect all the cables and remove the Electrolytic Capacitors.(see Figure 47-52 below)
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision B
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Tool Size (if
applicable)
T-15
170II
PH1
Page 2
Advertisement
