Table of Contents
Advertisement
Projecting a File
Stored on a Network
Directly—Network
File Viewer
Before starting
• Connect the projector and a computer via a
network. For details, see "Activating the
Network Features" on page 11.
• There are precautions on use of the Network
File Viewer feature. See "Use of Network
File Viewer" in "Precautions" on page 7
before you start using this feature.
Configuring the Settings on
the Computer
Set the file sharing to the folder that you will
be accessing from the projector.
You can set file sharing with [Properties] in
the [Explorer] window for the folder on the
connected computer.
Notes
• Be sure to use one-byte characters for the
folder name (share name). Other characters
cannot be input in the projector.
• Be sure not to delete or move the file while it
is open with the Network File Viewer
feature.
For the configuration on the computer, refer
to the help or the Microsoft website.
Configuring the Settings on
the Projector
1
Press the NETWORK key on the
remote commander.
The input signal setting is set to
"Network."
2
Press the
v or V
key to select "Switch"
then press the ENTER key.
The Switch dialog box is displayed.
Projecting a File Stored on a Network Directly—Network File Viewer
Switch
Remote Desktop
Network File Viewer
Video Streaming
Note
If "Network File Viewer" was selected,
this option is not shown in the Switch
dialog box. In this case, proceed to step 4.
3
Press the
v or V
key to select
"Network File Viewer" then press the
ENTER key.
The Network File Viewer menu is
displayed.
Network File Viewer display
Network File Viewer
Folder
\\
User Name
Password
4
Enter the "Folder" you are accessing
and "User Name" and "Password" of
the computer.
When you select an item to be entered
and press the ENTER key, the on-screen
keyboard is displayed.
Enter the folder name "\\(Computer
Name)\(Share name)."
Computer Name: Check it under the
"Computer Name" tab of "System
Properties" on the computer.
Share name: Check it under the
"Sharing" tab of "Folder Properties" on
the computer.
For the procedure for using the on-
screen keyboard, see "Using the On-
Screen Keyboard" on page 23.
5
Select "Connection" then press the
ENTER key.
Close
Select:
Set:
Connection
Detail Information
Switch
Select:
Set:
25
Advertisement
Table of Contents
