Table of Contents
Advertisement
, While playing a Super VCD on which audio
track 2 is not recorded, no sound will come out
when you select "2:STEREO," "2:1/L" or
"2:2/R."
The sound is noisy.
, The disc is dirty or flawed.
, The disc is not placed correctly.
, The headphones plug is dirty (page 5).
The volume is low when playing a
DVD.
, The sound in DVDs tends to be recorded in
lower level than that in CDs or VIDEO CDs
(page 10).
Operation
The remote does not function.
, If you are using the player with the
rechargeable battery, you cannot turn on the
player using the remote. Press
monitor unit or player.
, There are obstacles between the remote and
the player.
, The distance between the remote and the
player is too apart.
, The remote is not pointed at the remote sensor
on the player.
, The remote sensor of the player is exposed to
strong light.
, The batteries in the remote are weak.
The disc does not play.
, The disc is upside down, loose, etc.
, The player cannot play CD-ROMs, etc. (page
9). Depending on the disc, "C:13:00 The disc
is dirty." may appear in this case.
, The region code on the DVD does not match
that of the player (page 8).
, Moisture has condensed inside the player.
Remove the disc and leave the player for about
half an hour (page 3).
The disc does not start playing from
the beginning.
, Program Play, Shuffle Play, Repeat Play or A-
, Resume Play has been selected.
The player starts playing the disc
automatically.
, The DVD features an auto playback function.
Operation is not possible.
, The HOLD function is activated (The
NX
on the
The headphones volume cannot be
increased.
, AVLS is activated. Release AVLS (page 48).
Playback stops automatically.
, The disc automatically displays the menu (still
You cannot perform some functions
such as stop, Scan, Slow-motion Play,
Repeat Play, Shuffle Play, or Program
Play.
, Depending on the disc, you may not be able to
Messages do not appear on the
screen in the language you want.
, In Setup Display, select the desired language
B Repeat Play has been selected (page 28).
While pressing SHIFT, press VOL –
(CLEAR) to cancel these functions before
playing a disc.
While the player is stopped, press
pressing SHIFT, or open and then refasten the
buckle, and then start playback (page 25).
POWER indicator flashes in red). Release the
HOLD function (page 49).
image).
use some of the operations above. See the
operating manual that comes with the disc.
for the on-screen display in "OSD" under
"LANGUAGE SETUP" (page 64).
x
while
,
continued
71
Advertisement
Table of Contents
