Table of Contents
Advertisement
CHAPTER 3 PROGRAMMING PATTERNS
Adding an outline component point
1.
.
Touch
2.
.
Touch
3. Use
to move the cursor
point where you would like to add a component point.
* You can move the cursor continuously by holding down
the key.
Changing curve shapes
1.
.
Touch
2.
.
Touch
3. Use
to move the cursor
point in the curve that you would like to edit.
* You can move the cursor continuously by holding down
the key.
40
4. Press
to the component
4. Press
* You can only change the current component point if it and
5. Use the jog key to edit the curve.
to the component
6. Press
BAS H series, Programmer
.
* The component point will be automatically added
between the selected component point and the next
component point.
* You cannot add component points for circles
(circles specified by radius, circles specified by
diameter, circles specified by three points) and
ellipses.
.
the component points immediately before and after it are
part of a curve.
* To rotate the curve clockwise
Hold down
to rotate the curve clockwise.
* To rotate the curve counterclockwise
Hold
down
counterclockwise.
.
to
rotate
the
curve
- Quick Links:
- Contents and Usage
- Part Names and Functions
Hide quick links:
Advertisement
Table of Contents
