System Requirements - HP IndiChrome User Manual

Ink mixing system
Table of Contents

Advertisement

Window sections
Often, a window is divided into sections. Each section has a name displayed at its top
border. A section may contain fields.
Section
Section
name
Fields within a section are referred to by first the section name, and then the field name,
separated by a slash (/). They appear in bold type. For example: enter a value in the
Target / L* field.

System requirements

10 Chapter 1 Introduction
HP IndiChrome ink mixing system software version 5.5.
HP Indigo press software version:
• For Indigo Sun computer-based presses, software version 4.0 or preferably 4.1.
• For Series 1000/2000 presses and TurboStream-based presses, software version
2.0 or higher.
• For Series 3000/4000/5000 presses and UltraStream-based presses, software
version 3.5 or higher.
• For HP Indigo press 5000, software version 7.0
®
Pentium
133 MHz, or faster, computer; at least 16 MB RAM; Windows 95 or higher;
at least 5 MB free disk space; one free serial port; at least 16 bit or 64 K colors.
Operational Local Area Network (LAN): your computer and the HP Indigo press
computer must be nodes on the LAN.
This requirement is optional for Series 3000/4000/5000 presses, UltraStream-based
presses, Series 1000/2000 presses, and TurboStream-based presses.
Compressed air (optional). The pressure/flow rate must be at least 4 bar/0.1 liter per
second, but no more than 10 bar.
The air tank must be equipped with an attached air hose. The end of the air hose
should have an attached female quick connector. The matching male quick connector
should have the standard 6.35 mm (0.25 inch) BSP thread. The male connector is
connected to the dispensing unit.
Work area that includes at least 2 by 0.7 m (6.56 by 2.3 ft) of tabletop space and at
least 0.7 by 1 m (2.3 by 3.28 ft) of floor space.
Field
ENWW

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents