Table of Contents
Advertisement
Application Setup and Operation
Note
Option functions must be enabled before configuring or
running an application. To enable an option function,
you must activate a pre-installed license or purchase and
install a license. For details, see "[License] tab"
(page 17).
Configuring an
Application
Configure application settings before running an
application. This configuration is performed by the
administrator.
Note
Connect the unit and external devices before
configuring the application. Disconnecting and
reconnecting an HDMI cable, turning HDMI devices
on/off, or switching video signals while configuring or
running an application may prevent the settings from
being configured successfully or adversely affect the
video output from the unit.
1
Access the unit from a web browser.
For details about accessing the unit, see "Accessing
the Unit from a Web Browser" (page 8).
2
Select the application to configure from
[Applications].
3
Click the [Setup] button.
The application starts, and the setup screen for the
application appears.
Common application setup
operation
You can configure an application using the setup wizard
help guide displayed on the screen.
Press the [Next] button to move to the next screen of the
setup wizard, or the [Back] button to return to the
previous screen. Click the [Done] button to complete the
configuration.
Running an application
After configuring an application, click the [Run] button
on the application screen to run the application.
To exit an application
While configuring or running an application, click [<] at
the top left of the screen or turn off the unit.
Tip
If the unit is turned off while an application is running,
the application will automatically restart the next time
the unit is accessed.
21
Hide quick links:
Advertisement
Table of Contents
