FCC/IC information 1.4.2 Other certification information System overview Installing the transmitter Using the transmitter Supervision feature of the transmitter Generating a manual duress alarm Resetting transmitter alarm Testing the transmitter Bosch Security Systems B.V. Installation Manual 2019.07 | SE3v1.1 | DL...
All software is provided "AS IS." The sole obligation of BOSCH SECURITY SYSTEMS shall be to make available all published modifications that correct program problems are published within one (1) year from the date of shipment.
This will prevent damage to the unit due to lightning and excessive power line surges. 11. Restricted Access Locations are required for the installation. Bosch Security Systems B.V. Installation Manual 2019.07 | SE3v1.1 | DL...
Pendant transmitter, 433MHz Safety precautions Disposal Your Bosch product has been developed and manufactured using high- quality materials and components that can be reused. This symbol means that electronic and electrical devices that have reached the end of their working life must be disposed of separately from household waste.
Pendant transmitter, 433MHz Copyright, safety and warranty | en 1.4.2 Other certification information Bosch Security Systems B.V. Installation Manual 2019.07 | SE3v1.1 | DL...
Security Escort central console. During the alarm, the auto-tracking feature sends a signal to the central console at short successive intervals to constantly update and track its location. 2019.07 | SE3v1.1 | DL Installation Manual Bosch Security Systems B.V.
The transmitter uses a 3 VDC, CR2032 lithium coin cell battery. The following battery types are recommended: Duracell® DL2032, Eveready® CR2032, or Panasonic® CR2032. Assuming normal usage (such as weekly testing), the battery life of SEC-RFPB60M-433 should be approximately 3 years.
Page 10
Replacement of the battery with an incorrect type is subject to the risk of explosion. Batteries must not be disposed of in household waste to avoid the risk of explosion. Place the back cover of the transmitter into its original position. 2019.07 | SE3v1.1 | DL Installation Manual Bosch Security Systems B.V.
Page 11
Insert and fasten the screw of the back cover. Register the transmitter in the Security Escort database using the RFID code at the back of the transmitter, if necessary. Bosch Security Systems B.V. Installation Manual 2019.07 | SE3v1.1 | DL...
Page 12
| Installing the transmitter Pendant transmitter, 433MHz Test the transmitter for proper operation by generating an alarm. 2019.07 | SE3v1.1 | DL Installation Manual Bosch Security Systems B.V.
Testing the transmitter, page 14. Otherwise, the transmitter will time out after 10 minutes and automatically reset to the normal state. Bosch Security Systems B.V. Installation Manual 2019.07 | SE3v1.1 | DL...
If the test sequence is completed successfully, the LED of the transmitter will illuminate for a longer period a final time. A test transmission is sent to the central console and the LED of the transmitter will switch off. 2019.07 | SE3v1.1 | DL Installation Manual Bosch Security Systems B.V.
You may abort the test by not doing anything after starting the test sequence, and letting it time out after 3 seconds. The LED of the transmitter will stop blinking after the test sequence has timed out. Bosch Security Systems B.V. Installation Manual 2019.07 | SE3v1.1 | DL...