Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Before taking the IC recorder for repair, check the following sections. Should any problem
persist after you have made these checks, consult your nearest Sony dealer.
Please note that recorded messages may be erased during service or repair work.
IC recorder
Symptom
The IC recorder cannot be
turned off.
The IC recorder cannot be
turned on.
Display does not disappear.
Display appears blurred.
The IC recorder does not
operate.
No sound comes from the
speaker.
Sound comes from the
speaker even when the
headphones are plugged in.
82
GB
Remedy
• Slide the HOLD switch in the direction of the arrow when the IC
recorder is stopped (page 11).
• The HOLD switch is set. Slide the HOLD switch in the direction
opposite that of the arrow (page 11).
• Remove the protective film on the display window before you use
the IC recorder.
• The batteries have been inserted with incorrect polarity (page 9).
• The batteries are weak (page 10).
• The power to the IC recorder is off. Slide the HOLD switch in the
direction opposite that of the arrow (page 11).
• The HOLD function is activated. Slide the HOLD switch in the
direction opposite that of the arrow (page 14).
• You may have formatted the memory of the IC recorder using the
computer. Use the IC recorder formatting function to format the
memory (page 58).
• The volume is turned down completely (page 18).
• Headphones are plugged in (page 35).
• If you plug in the headphones not securely during playback, the
sound may come from the speaker. Unplug the headphones, and
then insert them securely.
Hide quick links:
Advertisement
Table of Contents
