1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Network Card
  5. TOSVERT BCN001Z
  6. Function manual

Toshiba TOSVERT BCN001Z Function Manual

Vf-ps1 series bacnet option unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TOSVERT VF-PS1 series
®
BACnet
Option unit Function Manual
1. Make sure that this instruction manual is delivered to the end user of BACnet ®
Option unit.
2. Read this manual before installing or operating the BACnet ® Option unit. Keep it in
a safe place for reference.
3. All information contained in this manual are subject to change without notice.
Please confirm the latest information on our web site.
BCN001Z
NOTICE
E6581440

Advertisement

Table of Contents
loading

Related Manuals for Toshiba TOSVERT BCN001Z

Summary of Contents for Toshiba TOSVERT BCN001Z

  • Page 1 E6581440 TOSVERT VF-PS1 series ® BACnet Option unit Function Manual BCN001Z NOTICE 1. Make sure that this instruction manual is delivered to the end user of BACnet ® Option unit. 2. Read this manual before installing or operating the BACnet ® Option unit. Keep it in a safe place for reference.
  • Page 2 E6581440 Introduction Thank you for purchasing the BACnet ® Option unit (BCN001Z) for VF-PS1 series inverter. Before using BACnet ® Option unit, carefully read this function manual in order to completely and correctly utilize its excellent performance. After reading this function manual, please keep it handy for future reference. For details of its general handling, see an instruction manual attached with the option unit.

  • Page 3: Table Of Contents

    E6581440 Table of Contents OVERVIEW ..............................3 NAMES AND FUNCTIONS ........................3 2.1. Outline ..............................3 BACnet ® Connector..........................3 2.2. 2.3. LED indicator............................4 2.4. MAC address setting..........................5 VF-PS1 PARAMETERS..........................7 3.1. Communication parameters.........................7 3.2. Network Baudrate (f831) ........................8 3.3. Network error detection (f832,f851,f852) ................8 3.4.

  • Page 4: Overview

    E6581440 1. Overview The BACnet ® option unit(BCN001Z) allows the VF-PS1 inverter to be connected into a BACnet ® network. BCN001Z is applicable for VF-PS1 software version V620 or later. 2. Names and functions The drawing below shows names and functions of main parts. 2.1.

  • Page 5: Led Indicator

    E6581440 2.3. LED indicator The LED shows the present status of the network and error. ■Layout of LED (Green) (Red) State LEDs Comment COM LED: OFF BCN001Z board failure. ERR LED: Flashing 5 times in 1 second COM LED: OFF Communication loss was detected.

  • Page 6: Mac Address Setting

    E6581440 2.4. MAC address setting The DIP switch on the circuit board of the option is used to set a MS/TP MAC address. Each DIP switch is ON when it is flipped to the lower position. The MAC address must be unique and not match any other device on a network segment.
  • Page 7 E6581440 OFF ON OFF OFF OFF OFF OFF OFF OFF ON ON OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF ON OFF ON ON OFF OFF OFF OFF ON OFF ON OFF OFF OFF OFF ON OFF OFF ON ON OFF OFF OFF ON OFF OFF ON OFF OFF OFF OFF ON ON OFF ON ON OFF OFF OFF ON ON...

  • Page 8: Vf-Ps1 Parameters

    E6581440 3. VF-PS1 Parameters 3.1. Communication parameters Set up the inverter parameters as follows. To update, reset of inverter. If these parameters are not set to correct value, this unit can not work normally. Factory Title Function Description setting 0: AUTO adaptive,1: 9600bps,2: 19200bps, Network Baudrate (*1) (*2) 0000 f831...

  • Page 9: Network Baudrate (F831)

    E6581440 3.2. Network Baudrate (f831) Set the network baudrate to f831. Set the same baudrate in the network. If set AUTO baudrate, the option unit detects network baudrate automatically. 3.3. Network error detection (f832,f851,f852) Set the network communication loss action time to f832. The network loss detection starts from the first receiving of the proper frame message.

  • Page 10: Functions

    E6581440 4. Functions This option board is based on BACnet ® “Application Specific Controller” (B-ASC). 4.1. Object / Property support Matrix This option board supports below table objects and properties. Object Type Property Binary Binary Binary Analog Analog Analog Device Input Output Value...

  • Page 11: Drive I/O Objects

    E6581440 4.2. Drive I/O Objects 4.2.1. Binary Input Object Instance Binary input objects allow to monitor the inverter actual terminal ON/OFF status. These objects are read only. If it is necessary to read inverter terminal output status via BACnet® network, Binary input object can be used to. Binary input #0 is FL labeled terminal monitor.

  • Page 12: Binary Output Object Instance

    E6581440 4.2.2. Binary Output Object Instance Binary output objects allow to control output terminals via BACnet ® network. Set the terminal function parameter(see below table) before control output terminals. These commandable objects can be used for priority-array and relinquish-default property. Active / Instance ID Object Name...

  • Page 13: Binary Value Objects Instance

    E6581440 4.2.3. Binary Value Objects Instance Binary value objects allow to monitor inverter status and send command such as RUN/STOP command. Commandable objects can be used for priority-array and relinquish-default property. Binary Active/ Object Name Description Access Value ID Inactive Text Indicates the drive run status RUN/STOP ACT RUNS/READY...

  • Page 14: Analog Input Object Instance

    E6581440 4.2.4. Analog Input Object Instance The analog input objects allow to monitor inverter analog input terminal level. These objects only read inverter parameters those are prepared as read only monitor parameters(from fe35 to fe39). These objects present-value unit is “%” unit, and present-value=100.0% mean analog input terminals are a full range input level.

  • Page 15: Analog Value Object Instance

    E6581440 4.2.6. Analog Value Object Instance The analog value objects allow to monitor drive status such as output frequency, current and voltage. Additionally, drive speed reference can be set as Analog Value #16. Binary Object Name Description UNIT Access Value ID OUTPUT SPEED Output speed[min ](Calculate from fd00)

  • Page 16: Device Objects

    Property Name Property Value Object Name “VF-PS1” Object Type 8 (device) Vendor Name “TOSHIBA” Vendor Identifier Model Name “VFPS1-2007P” (depend on the VSD model) Firmware Revision “V1.00” (depend on the option software version) Application Software Version “V6.20” (depend on the VSD software version)

  • Page 17: Mailbox Function Points

    E6581440 5. Mailbox Function Points Mail box object allow to read/write inverter parameters via BACnet ® network. Object ID Object Name Description Set parameter individual communication number. Communication address is normally consist of characters from 0 to 9, but Analog value MBOX PARAM Interpreted hexadecimal code internally.

  • Page 18: Vf-Ps1 Fault Code

    E6581440 5.1. VF-PS1 Fault code VF-PS1 Fault Code Table Code Code Description Display (Dec) (Hex) 0 No error nerr 1 Over-current during acceleration 2 Over-current during deceleration 3 Over-current during constant speed operation 4 Over-current in load at startup 5 U-phase arm overcurrent ocai 6 V-phase arm overcurrent oca2...

  • Page 19: Specifications

    E6581440 6. Specifications < Environmental specification > Item Specification B C N 0 0 1 Z M o d e l n u m b e r Service environment Conforms to VF-PS1 Conforms to VF-PS1 A m b i e n t t e m p e r a t u r e Storage temperature -25 to +65 ℃...

Table of Contents