Sony MDR-RF6000 Operating Instructions
Wireless stereo headphones
Hide thumbs
Also See for MDR-RF6000:
- Operating instructions manual (32 pages) ,
- Service manual (20 pages)
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Wireless Stereo
Headphones
Operating Instructions
Mode d'emploi
Manual de instrucciones
MDR-RF6000
© 2006 Sony Corporation
Printed in Malaysia
Disposal of Old Electrical &
English
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
WARNING
This symbol on the product or on its packaging
indicates that this product shall not be treated as
To reduce the risk of fire or electric shock,
household waste. Instead it shall be handed over to
do not expose this apparatus to rain or
the applicable collection point for the recycling of
moisture.
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
To reduce the risk of fire or electric shock, do not place
potential negative consequences for the environment
objects filled with liquids, such as vases, on the
and human health, which could otherwise be caused
apparatus.
by inappropriate waste handling of this product. The
To avoid electrical shock, do not open the cabinet.
recycling of materials will help to conserve natural
Refer servicing to qualified personnel only.
resources. For more detailed information about
recycling of this product, please contact your local
Civic Office, your household waste disposal service or
the shop where you purchased the product.
Hereby, Sony Corp., declares that this equipment is in
compliance with the essential requirements and other
Welcome!
relevant provisions of Directive 1999/5/EC.
For details, please access the following URL : http://
Thank you for purchasing the Sony MDR-RF6000
www.compliance.sony.de/
Wireless Stereo Headphones. Before operating the
unit, please read this manual thoroughly and retain it
This product is intended to be used in the following
for future reference.
countries.
Some features are:
United Kingdom
• Wireless headphones using a digital radio frequency
Germany, Sweden, Denmark, Finland, Norway,
transmission system which reproduces
Belgium, Switzerland, Austria, Netherlands,
uncompressed transmission sound, resistant to
France, Portugal, Italy, Spain, Luxembourg
external noise and interference.
• Easy recharging system automatically charges the
This product shall exclusively be used inside
headphones when they are placed on the processor.
buildings. Any outdoor use of this product is
• Self-adjusting mechanism headband eliminating the
prohibited on the French territory (including French
need for adjustment.
overseas departments).
• Auto Power On/Off function automatically turns on
the headphones when you put them on, and turns
them off when they are removed.
• VOL control for adjusting both the right and left
volume of the headphones.
• Uses either rechargeable nickel-metal hydride
battery (supplied) or commercially available (size
AA) alkaline batteries.
Overview
The MDR-RF6000 is a wireless stereo headphone
which uses 2.4 GHz wireless digital transmission.
Connect the digital surround processor to your DVD
device or a digital satellite/TV receiver and you can
listen to a programme free from the restriction of the
headphone cord. By using the DP-RF6000 Digital
Surround Processor, you can enjoy a multi-channel
surround sound environment.
The separately sold processor is necessary
The headphones cannot be used alone.
Use the separately sold Sony Digital Surround
Headphone System MDR-DS6000.
2-656-451-22(1)
Before using this unit as additional
Inserting the supplied
headphones
Each processor has its own ID number. Be sure to set
rechargeable nickel-
your processor's ID to that of this unit, otherwise this
unit will not work.
metal hydride battery
1
The supplied rechargeable nickel-metal hydride
battery is not charged from the first time you use it. Be
sure to charge it before use.
2
To charge the headphones, place them on the
processor. Please refer to the manual of MDR-DS6000
for more details.
Note
The processor turns off automatically while charging.
Note that the battery cannot be charged while using
3
the processor.
1
Open the battery compartment lid of the
left housing.
The battery compartment lid comes off.
Left
housing
2
Insert the supplied rechargeable nickel-
metal hydride battery into the battery
compartment, matching 3 terminal on the
Listening to the sound
battery to the 3 mark in the compartment.
of a connected
Do not attempt to charge any other kind of
battery with this unit.
component
If you use the MDR-DS6000, read the manual for the
MDR-DS6000 too.
1
2
Note
The battery compartment has a tab on the # side
which holds the rechargeable battery in place.
3
Insert the # terminal first when installing the
rechargeable battery.
3
Close the battery compartment lid.
2
1
Battery life
Battery
Approx. hours
*
1
rechargeable nickel-metal
7 hours*
2
hydride battery
(when fully
(BP-HP2000: supplied)
charged)
4
Sony alkaline batteries
5 hours*
2
(LR6(SG): sold separately)
*
1
at 1 kHz, 1 mW + 1 mW output
*
2
Time may vary, depending on the temperature or
conditions of use.
Notes on batteries
• Do not charge a dry battery.
• Do not carry a battery together with coins or
metallic objects. Heat can be generated by the
battery if its positive and negative terminals are
accidentally shorted.
• When you are not going to use the unit for a long
time, remove the batteries to avoid damage from
battery leakage or corrosion.
Checking the remaining battery power
Pull up the self-adjusting band and check the POWER
indicator located on the right housing. The batteries
The headphones automatically turn off
are still usable when the indicator lights in blue.
when they are removed
Charge the rechargeable battery or install new alkaline
— Auto Power On/Off function
batteries if the POWER indicator does not light up.
Do not pull up the self-adjusting band when not in
use, as this will consume the battery power.
POWER
indicator
Note
The rechargeable nickel-metal hydride battery should
be replaced with new a one when it lasts only half the
expected time, after a full charge has been performed.
The rechargeable battery, type BP-HP2000, is not
commercially available. You can order the battery
from the store where you purchased this system, or at
your nearest Sony dealer.
If a beep sound is heard from the
headphones
A repeated beep sound is heard if reception
conditions deteriorate when the headphones are
outside the signal transmission area, or another
wireless apparatus using 2.4 GHz frequency or
Remove the headphones from the
microwave oven causes interference. If the beep sound
processor.
does not stop after moving closer to the processor, let
the processor detect the optimum frequency for
The processor turns on automatically.
transmission again following the procedure below.
Put on the headphones.
1
The headphones automatically turn on.
Press TUNE/ID SET on the processor once.
The RF indicator blinks and
Note
the processor detects the
Charge the rechargeable battery of this unit before
optimum frequency
setting the ID, or use commercially available (size
automatically. After
AA) alkaline batteries.
detection is completed, the
Press and hold TUNE/ID SET on the
RF indicator lights up and
processor and that on the headphones at
emission starts.
the same time for more than 3 seconds.
A repeated beep sound is heard from the
2
Press TUNE/ID SET on the headphones once.
headphones and ID setting starts. When the
The headphones detect the
sound changes to a continuous beep sound, the ID
frequency of the processor
number is set for the headphones.
automatically. The beep sound
stops when the headphones
start receiving signals.
Specifications
General
Playback frequency range
12 – 22,000 Hz
Power requirements
Rechargeable nickel-metal hydride battery
(supplied) or commercially available (size
AA) alkaline batteries
Mass
Approx. 360 g (12.7 oz) (including the
supplied rechargeable nickel-metal
Turn on the component connected to the
hydride battery)
processor.
Supplied accessories
Rechargeable nickel-metal hydride battery
Remove the headphones from the
BP-HP2000 (2,100 mAh) (1)
processor.
Operating Instructions (this manual) (1)
Design and specifications are subject to change
Put on the headphones.
without notice.
The POWER indicator lights blue, and the
headphones automatically turn on.
Be sure to match the right and left side of the
headphones with your ears and wear the
Precautions
headphones at the correct angle so that the Auto
Power On/Off function works correctly. Sound is
heard from the headphones about 3 seconds after
On safety
you put on the headphones.
• Do not drop, hit, or otherwise expose the
headphones to strong shock of any kind. This could
damage the product.
• Do not disassemble or attempt to open any parts of
the system.
Do not place the system in any of the
following locations.
• Location exposed to direct sunlight, near a heater, or
other extremely high-temperature location.
POWER
indicator
• Bathroom or other high-humidity locations.
On headphones
Act considerately
Adjust the volume.
When the volume is too high, the sound leaks outside
the headphones. Be careful not to raise the volume so
high that it bothers people around you.
There is a tendency to raise the volume when using in
noisy places. However, for reasons of safety, it is
advised to keep the volume at a level whereby you
can still hear sounds around you.
Raise the
Lower the
volume
volume
On ear pads
The ear pads are replaceable. Replace them when they
Notes
are worn out. To replace the ear pads, consult your
• When watching films, be careful not to raise the
nearest Sony dealer.
volume too high in quiet scenes. You may hurt
your ears when a loud scene is played.
On cleaning
• You may hear some noise when you disconnect
Use a soft cloth slightly moistened with mild
the AC power adaptor from the processor
detergent solution. Do not use solvents such as
before removing the headphones.
thinner, benzene or alcohol as these may damage the
surface.
When the product breaks
• When the product breaks, or if a foreign object gets
inside the unit, immediately turn off the power and
consult your nearest Sony dealer.
• When taking the system to a Sony dealer, be sure to
take both the headphones and processor.
Self-adjusting
band
Français
Troubleshooting
Check and try the suggestions below before you bring
your headphones to a repair service. Should any
problem persist, consult your nearest Sony dealer.
AVERTISSEMENT
No sound
, Check the connection between the processor
and the AV component.
Afin de réduire les risques d'incendie ou de
, Check that the signal is not being input to the
choc électrique, n'exposez pas cet appareil
digital out jack by mistake when digital input is
à la pluie ni à l'humidité.
selected.
, Turn on the AV component connected to the
Pour réduire les risques d'incendie ou d'électrocution,
processor, and start the programme (playback).
ne placez pas de récipients remplis de liquides (vases,
, If you connect the processor to an AV
component using the headphone jack, raise the
etc.) sur l'appareil.
volume level on the connected AV component.
Pour éviter tout risque d'électrocution, n'ouvrez pas le
, Make sure you are wearing the headphones
coffret. Ne confiez les réparations qu'à un technicien
correctly.
qualifié.
, Raise the headphone volume.
, The headphones' POWER indicator goes off.
• Charge the rechargeable battery if it is weak,
or replace alkaline batteries with new ones. If
the POWER indicator is still off after charging
Par la présente, Sony Corp. déclare que cet appareil
the battery, take the headphones to a Sony
est conforme aux exigences essentielles et aux autres
dealer.
dispositions pertinentes de la directive 1999/5/CE.
Distorted or intermittent sound
Pour de plus amples informations, veuillez vous
(sometimes with noise)
reporter à l'URL suivante :
, Charge the rechargeable battery if it is weak, or
http://www.compliance.sony.de/
replace alkaline batteries with new ones. If the
Ce produit est conçu pour être utilisé dans les pays
POWER indicator is still off after charging the
battery, take the headphones to a Sony dealer.
suivants.
, Check if there is any wireless apparatus using
Royaume-Uni
2.4 GHz frequency, or a microwave oven in the
Allemagne, Suède, Danemark, Finlande, Norvège,
vicinity.
Belgique, Suisse, Autriche, Pays-Bas, France,
, Change the position of the processor.
Portugal, Italie, Espagne, Luxembourg
, If you connect the processor to an AV
component using the headphone jack, lower
Ce produit est destiné exclusivement à un usage
the volume level on the connected AV
intérieur. Toute utilisation de ce produit à l'extérieur
component.
est interdite sur le territoire français (y compris dans
les départements d'outre-mer).
Low sound
, If you connect the processor to an AV
component using the headphone jack, raise the
Traitement des appareils
volume level on the connected AV component.
électriques et électroniques
, Raise the headphone volume.
en fin de vie (Applicable dans
les pays de l'Union
Loud background noise
, Check if there is any wireless apparatus using
Européenne et aux autres
2.4 GHz frequency, or a microwave oven in the
pays européens disposant de
vicinity.
systèmes de collecte sélective)
, If you connect the processor to an AV
component using the headphone jack, raise the
Ce symbole, apposé sur le produit ou sur son
volume level on the connected AV component.
emballage, indique que ce produit ne doit pas être
, Charge the rechargeable battery if it is weak, or
traité avec les déchets ménagers. Il doit être remis à un
replace alkaline batteries with new ones. If the
point de collecte approprié pour le recyclage des
POWER indicator is still off after charging the
équipements électriques et électroniques. En
battery, take the headphones to a Sony dealer.
s'assurant que ce produit est bien mis au rebut de
manière appropriée, vous aiderez à prévenir les
The battery cannot be charged
conséquences négatives potentielles pour
, Check if the CHG indicator turns on. If not, put
l'environnement et la santé humaine. Le recyclage des
the headphones on the processor correctly so
matériaux aidera à préserver les ressources naturelles.
that the CHG indicator turns on.
Pour toute information supplémentaire au sujet du
, Dry batteries are installed.
recyclage de ce produit, vous pouvez contacter votre
• Insert the supplied rechargeable nickel-metal
municipalité, votre déchetterie ou le magasin où vous
hydride battery.
, Rechargeable batteries other than the supplied
avez acheté le produit.
are installed.
• Insert the supplied rechargeable nickel-metal
hydride battery.
, The processor's contact pin and headphones'
Bienvenue !
contact point are dusty.
• Wipe them with a cotton bud, etc.
Nous vous remercions d'avoir fait l'acquisition de ce
casque stéréo sans fil Sony MDR-RF6000. Avant
d'utiliser cet appareil, veuillez lire attentivement ce
manuel et conservez-le pour toute référence
ultérieure.
Cet appareil offre, entre autres, les caractéristiques
suivantes :
• Casque d'écoute sans fil utilisant un système de
transmission radioélectrique qui reproduit des sons
non compressés, isolé des bruits extérieurs et des
interférences.
• Système de recharge facile permettant le chargement
automatique du casque lorsqu'il est placé sur le
processeur.
• Serre-tête à mécanisme auto-ajustable évitant à
l'utilisateur d'avoir à régler sa taille.
• Fonction de mise sous tension et hors tension
automatique permettant d'activer automatiquement
le casque lorsque vous le mettez et de le désactiver
lorsque vous le retirez.
• Bouton VOL permettant de régler le volume droit et
gauche du casque.
• Alimentation par pile rechargeable nickel-hydrure
métallique (fournie) ou piles alcalines (taille AA)
disponibles dans le commerce.
Présentation
Le MDR-RF6000 est un casque stéréo sans fil utilisant
la transmission numérique sans fil à 2,4 GHz.
Raccordez le processeur ambiophonique numérique à
votre appareil DVD ou à un récepteur satellite
numérique/téléviseur, vous pouvez alors écouter un
programme sans être limité par le cordon du casque.
Grâce au processeur ambiophonique numérique
DP-RF6000, vous pouvez profiter des avantages d'un
son ambiophonique multicanal.
Le processeur vendu séparément est
nécessaire
Le casque ne peut pas être utilisé seul.
Utilisez le système de casque ambiophonique
numérique Sony MDR-DS6000 vendu séparément.
Insertion de la pile
rechargeable nickel-
hydrure métallique
fournie
La pile rechargeable nickel-hydrure métallique fournie
n'est pas encore chargée lorsque vous l'utilisez pour la
première fois. Chargez-la avant de l'utiliser.
Pour recharger le casque, placez-le sur le processeur.
Veuillez vous reporter au mode d'emploi du
MDR-DS6000 pour obtenir plus d'informations.
Remarque
Le processeur s'éteint automatiquement pendant le
chargement de la pile. Notez que la pile ne peut pas être
chargée lorsque le processeur est en cours d'utilisation.
1
Ouvrez le couvercle du compartiment à piles
de l'écouteur gauche.
Le couvercle du compartiment à piles s'ouvre.
Ecouteur
gauche
2
Insérez la pile nickel-hydrure métallique
rechargeable dans le compartiment à piles
en faisant correspondre la borne 3 de la
pile avec le repère 3 du compartiment.
N'essayez pas de recharger d'autres types de piles
sur cet appareil.
Remarque
Le compartiment à piles dispose d'un onglet situé
sur le côté # qui permet de maintenir la pile
rechargeable en place. Commencez par insérer la
borne # lorsque vous installez la pile rechargeable.
3
Refermez le couvercle du compartiment à
piles.
2
1
Autonomie de la pile
Pile
Durée
approximative
*
1
7 heures*
2
Pile rechargeable nickel-hydrure
métallique (BP-HP2000 : fournie)
(complètement
chargée)
Pile alcaline Sony (LR6 (SG) :
5 heures*
2
vendue séparément)
*
1
à 1 kHz, sortie de 1 mW + 1 mW
*
2
La durée mentionnée ci-dessus peut varier selon la
température ou les conditions d'utilisation.
Remarques concernant la pile
• Ne rechargez pas une pile sèche.
• Ne mettez pas la pile en contact avec des pièces de
monnaie ou des objets métalliques. Celle-ci peut en
effet produire de la chaleur si les bornes positives et
négatives entrent accidentellement en contact avec
les objets métalliques.
• Si vous n'utilisez pas l'appareil pendant un certain
temps, retirez la pile pour éviter tout
endommagement dû à une fuite ou à la corrosion.
Vérification de l'autonomie des piles
Soulevez la bande auto-ajustable et vérifiez le témoin
d'alimentation POWER situé sur le boîtier de
l'écouteur droit. Les piles sont encore en état de
marche lorsque le témoin s'allume en bleu.
Chargez la pile rechargeable ou installez des piles
alcalines neuves si le témoin d'alimentation POWER
ne s'allume pas.
Témoin d'alimen-
tation POWER
Remarque
Les piles rechargeables nickel-hydrure métallique
doivent être remplacées par des piles neuves lorsque
qu'elles ne durent plus que la moitié de leur durée
normale après un rechargement complet. Les piles
rechargeables de type BP-HP2000 ne sont pas
disponibles dans le commerce. Vous pouvez les
commander dans le magasin où vous avez acheté ce
système ou chez votre revendeur Sony le plus proche.
(Suite à la page suivante)
Advertisement
Related Manuals for Sony MDR-RF6000
Summary of Contents for Sony MDR-RF6000
- Page 1 Sony dealer. Do not pull up the self-adjusting band when not in • When taking the system to a Sony dealer, be sure to use, as this will consume the battery power. take both the headphones and processor.
- Page 2 Abra la tapa del compartimiento de pilas situado en el receptáculo izquierdo. correctement. La tapa del compartimiento de las pilas se Por medio de la presente, Sony Corp. declara que el desprende. equipo cumple con los requisitos esenciales y s’éteint.