Configuring
10.4 Overview of important parameters
10.4
Overview of important parameters
A detailed description of the parameters listed below can be found in the following manual:
SINAMICS S120/S150 List Manual
Overview of important parameters:
● r5170[0...5] HF phase current actual values
● r5171 CO: HF damping voltage actual value
● r5172[0...3] CO: HF temperatures
● r5173 CO: HF Damping Module overload I
● r5175[0...1] HF diagnostics
● p5174 HF control word
● p0161 HF Damping Module component number
● p0162 HF Choke Module component number
● p0233 power unit motor reactor
● p0234 power unit sine-wave filter capacitance
● p1980[0...n] PolID technique (the values of this parameter cannot be freely set.)
10.5
Alarm and fault messages
All alarm and fault messages are displayed on the operator panel. Detailed information on
the displayed alarm and fault messages can be found in the SINUMERIK Diagnostics
Manual, in the SINAMICS S120/S150 List Manual and in the online help for the control
system.
10.6
Safety-related functions
Information on the safety-related functions, which apply for High Frequency Drive, can be
found in the following manual:
SINAMICS S120 Function Manual Safety Integrated (FHS)
164
t
2
System Manual, (SH2), 04/2015, 6SL3097-4AH10-0BP3
High Frequency Drive