Requirements - Siemens SIMATIC S7-1500R/H Getting Started
Redundant system
Hide thumbs
Also See for SIMATIC S7-1500R/H:
- Manual (46 pages) ,
- Equipment manual (44 pages) ,
- System manual (523 pages)
Table of Contents
Advertisement
Introduction to the example
1.4 Requirements
1.4
Requirements
Requirements for the Example
The following hardware and software is available for processing the example:
Table 1- 2
Hardware/software requirements
Hardware/software
2 H-CPUs with synchroniza-
tion modules and SIMATIC
Memory Cards
3 ET 200SP distributed I/O
systems
2 HMI devices
2 load current supplies for
S7-1500R/H
3 load current supplies for
ET 200SP
Accessories
PC/PG with Engineering-
System
Switch for the connection of
the PG/PC
12
Modules//Versions
2 identical 1517H-3 PN CPUs with identical article numbers, function versions and firm-
•
ware version
4 synchronization modules for cables up to 10 km in length (6ES7960-1FB00-0AA5)
•
2 SIMATIC Memory Cards e.g. with 256 Mbyte capacity (6ES7954-8LL02-0AA0)
•
2 ET 200SP for tunnel sections 1 and 3 each consisting of:
1 interface module IM 155-6 PN HF (6ES7155-6AU01-0CN0), FW version V4.2 or later
•
(with system redundancy S2)
4 digital output modules:
•
–
2 DQ 4x24VDC/2A ST each with a light-colored BaseUnit, BU type A0: BU15-
P16+A0+2D
–
1 DQ 4x24VDC/2A ST with a dark-colored BaseUnit, BU type A0: BU15-P16+A0+2B
–
1 DQ 4x24..230VAC/2A HF with a light-colored BaseUnit, BU type U0: BU20-
P16+A0+2D
1 analog input module:
•
–
AI 4xU/I 2-wire ST with a dark-colored BaseUnit, BU type A0: BU15-P16+A0+2B
1 server module
•
1 ET 200SP for tunnel section 2 consisting of:
1 interface module IM 155-6 PN HF (6ES7155-6AU01-0CN0), FW version V4.2 or later
•
(with system redundancy S2)
2 digital output modules:
•
–
1 DQ 4x24VDC/2A ST with a light-colored BaseUnit, BU type A0: BU15-P16+A0+2D
–
1 DQ 4x24..230VAC/2A HF with a light-colored BaseUnit, BU type U0: BU20-
P16+A0+2D
1 analog input module:
•
–
AI 4xU/I 2-wire ST with a dark-colored BaseUnit, BU type A0: BU15-P16+A0+2B
1 server module
•
TP1900 Comfort
PM 190 W 120/230 V AC
Load current supplies with 24 V DC output voltage (with safe electrical isolation)
1 mounting rail, 2 fiber-optic cables, PROFINET cables
PG/PC with Ethernet interface and the following correctly installed software package:
SIMATIC STEP 7 Professional, V15.1 or later
•
SCALANCE X-204IRT
S7-1500R/H redundant system
Getting Started, 10/2018, A5E44910930-AA
Hide quick links:
Advertisement
Table of Contents
