Connect Converter To Ethernet/Ip; What Do You Need For Communication Via Ethernet/Ip - Siemens SINAMICS G110M Function Manual
Fieldbuses
Hide thumbs
Also See for SINAMICS G110M:
- Operating instructions manual (428 pages) ,
- Original instructions manual (344 pages) ,
- Function manual (244 pages)
Table of Contents
Advertisement
Communication via EtherNet/IP
4.2 Connect converter to Ethernet/IP
4.2
Connect converter to Ethernet/IP
Procedure
To connect the inverter to a control system via Ethernet, proceed as follows:
1. Connect the inverter to the control system via an Ethernet cable.
2. You create an object for data exchange.
You have the following options:
– Load the EDS file into your control.
– If your control does not accept the EDS file, then you must create a generic module in
You have connected the inverter to the control system via EtherNet/IP.
Routing and shielding Ethernet cables
Information can be found on the Internet:
EtherNet/IP
(http://www.odva.org/Home/ODVATECHNOLOGIES/EtherNetIP/EtherNetIPLibrary/tabid/76/l
ng/en-US/Default.aspx)
Commissioning the inverter in an EtherNet/IP network
To commission the inverter, connect the inverter via the USB interface with your computer
on which STARTER, Version > 4.2 has been installed.
For additional information, refer to the operating instructions of your inverter.
4.3
What do you need for communication via Ethernet/IP?
Check the communication settings using the following questions. If you answer "Yes" to the
questions, you have correctly set the communication settings and can control the inverter via
the fieldbus.
● Is the inverter correctly connected to the EtherNet/IP?
● Is the EDS file installed in your control system?
● Have the bus interface and IP address been correctly set?
● Have the signals that the inverter and the control system exchange been correctly
interconnected?
80
You can find the EDS file in the Internet:
EDS (https://support.industry.siemens.com/cs/ww/de/view/78026217)
your control:
Create generic I/O module (Page 99)
Overview of the manuals (Page 235)
Function Manual, 01/2016, FW V4.7 SP6, A5E34229197B AC
Fieldbuses
Advertisement
Table of Contents
