Kenwood TKR-750 Programming Reference Manual page 35
Hide thumbs
Also See for TKR-750:
- Service manual (102 pages) ,
- Brochure & specs (2 pages) ,
- Instruction manual (2 pages)
Table of Contents
Advertisement
the speaker. It operates in the signalling squelch mode
when it makes the repeat operation.
" Scrambler Backup
It can restore the Voice Scrambler configuration.
When this function is enabled, the On/Off status is
backup even if you turn the TKR-751/851 OFF after
Voice Scrambler is on.
Checked
The Voice Scrambler status is backup.
Range
The Voice Scrambler status is
Unchecked
canceled and return to the default.
Default Unchecked
Note:
! You can use this function only when the optional Voice
Scrambler Board is installed in it.
! Refer to the Modification Information when installing the
optional Voice Scrambler Board in the TKR-750/850/751/
851.
" TX Standby on Frequency
It can shift a transmission frequency when the TKR-
750/850/751/851 is in standby mode. (Refer to FUNC
13 TX Standby Frequency function.)
Wait a call with the transmission
Checked
frequency configured to each channel.
Range
Shifts the transmission frequency by
Unchecked
-18.75 kHz and wait a call.
Default Unchecked
" PTT Priority
It can configure the priority of the repeater PTT, the
external PTT, and the Local Mic PTT. When the
selected PTT configuration has higher priority than the
current PTT, the TKR-750/850/751/851 switches the
signalling and the modulation signal line
corresponding to the selected PTT configuration that
has higher priority. Change the priority of the PTT by
the spin buttons. (Refer to FUNC 6.7 PTT Priority.)
Priority 1: Local Mic PTT
Default
Priority 2: External PTT
Priority 3: Repeater PTT
Version: 1.01
" Firmware Program
It can allow the TKR-750/850/751/851 enter in the
Firmware Programming Mode. When this function is
enabled, the it enters Firmware Programming Mode
by pressing the PF1 key and the power switch on at
the same time.
Range
Default Unchecked
Note: You must run the "FPRO.EXE" in order to write the
YOU MUST CONFIRM THAT THIS FUNCTION SHOULD
BE DISABLED BEFORE SHIPPING TO THE END USER.
OTHERWISE, IT MIGHT HAVE SOME TROUBLE TO
REWRITE OR BROKEN IT ACCIDENTALLY.
Field Programming Reference (FPRG)
Allow to enters Firmware
Checked
Programming Mode.
Not allow to enters Firmware
Unchecked
Programming Mode
Firmware program. Refer to the Service Manual for
details.
6 EDIT MENU
30
- Quick Links:
- Connecting to the Pc
Hide quick links:
Advertisement
Table of Contents
