Table of Contents
Advertisement
2
Siemens Building Technologies
Cerberus Division
1.1
Scope of this document
This manual is intended as a guide for planning, installation and service personnel of
Cerberus danger management systems which use GW-21 device.
All necessary information to install an LMS gateway are listed in this manual.
The manual is divided into 8 chapters and 4 annexes; a Table of Contents and an Index
allow easy referencing to the arguments.
Chapter 1 is an introduction to the manual;
Chapter 2 describes the product and the available configurations;
Chapter 3 shows how to install the gateway inside the CS4/CS11 and how to power it;
Chapter 4 describes the CPU board;
Chapter 5 explains how to set the baud rates and shows the suggested or compulsory
baud rates for the various subsystems that can be connected to the GW-21;
Chapter 6 shows the cable and connection among the GW-21 and the other devices it
can be connected to;
Chapter 6 contains three examples of gateway configuration
Chapter 7 describes how you can identify problems that can possibly arise.
explains the use of STT subsystem, manufactured by Cerberus Guinard,
Appendix A
in conjunction with the Gateway GW-21.
lists the firmware versions compatible with LMS software versions, as well
Appendix B
as the limits about subsystems managed.
contains a summary of DIL-Switch settings.
Appendix C
describes the previous version of GW-21 board and connection cables.
Appendix D
describes the safety instructions.
Appendix E
They are included here for reference.
1.2
Related publications
The following documents could be useful in dealing with GW-21 gateway and under-
standing how it relates to other pieces of the LMS network:
§ GW-20 Technical manual
§ CMX Technical manual
§ CF9003 Technical Manual
§ LMSmodular User Manual
§ LMSmodular Configuration Guide
§ LMSmodular Configuration Reference
§ LMSmodular Installation Manual
e1478
e1110
e1762
e1865
e1863
e1864
e1862
E1481b
06.2000
Advertisement
Table of Contents
