Setting Initialization Parameters - Huawei SmartLogger1000 User Manual
Hide thumbs
Also See for SmartLogger1000:
- User manual (179 pages) ,
- Quick manual (19 pages) ,
- Commissioning manual (40 pages)
Table of Contents
Advertisement
SmartLogger1000
User Manual
Step
4
5
6
7
5.2 Setting Initialization Parameters
When starting the SmartLogger for the first time, set initialization parameters on the
monitoring panel.
Context
Issue 12 (2019-01-15)
Operation
Set the search address segment and baud rate for the RS485 port on the
SmartLogger monitoring panel.
If the SmartLogger is powered on for the first time, set the search address
segment and baud rate for the RS485 port in the Wizard, as shown in
Setting Initialization
set the parameters in the Comm. Param. under the Settings, as shown in
6.2.26 Setting Communications
Wait for the SmartLogger to search for inverters. After the search is
completed, the SmartLogger automatically connects to all inverters.
Alternatively, you can skip this operation and manually search for, add, or
delete inverters in follow-up operations. For details, see
Devices.
(Optional) Manually add an environment monitoring instrument, power
meter, PLC, or third-party device.
For details, see
NOTICE
Before adding an environment monitoring instrument or power meter, log in to the
WebUI and correctly set parameters for the device to be added. Before adding a
third-party device, import a correct configuration file for the device.
(Optional) Start the PC and correctly set parameters of the Ethernet and
management system on the SmartLogger.
Use the delivered 12 V power adapter when starting the SmartLogger. Confirm with the
local Huawei engineers if using other types of power adapters.
Log in to the SmartLogger on the monitoring panel. When you log in to the Settings page
or Maintenance page, an identity authentication is required. The initial password is
000001. Change the password as soon as possible to ensure the security of the user
account. For details about how to change the password, refer to
Password.
If the SmartLogger is started for the first time, set the initialization parameters by referring to this
section. If it is not started for the first time, it directly performs the automatic search and then the default
page.
Copyright © Huawei Technologies Co., Ltd.
Parameters. If it is not powered on for the first time,
Parameters.
6.2.34 Managing
Devices.
5 System Operation
5.2
6.2.34 Managing
6.2.25 Changing a
55
Advertisement
Table of Contents
