Paper Jam During Duplex-Printing; Registration Sensor Does Not Detect Paper Feed Within Specified Pulse - Brother MFC-J3520 Service Manual
Inkjet mfc
Hide thumbs
Also See for MFC-J3520:
- User manual (220 pages) ,
- Quick setup manual (45 pages) ,
- Safety manual (21 pages)
Table of Contents
Advertisement
Error Code 18
Paper Jam
Paper jam during duplex-printing
Registration sensor does not detect paper feed within specified pulse numbers in the
second side paper re-feed
(recording paper was pulled out, or very likely to have been pulled out.)
User Check
- Remove the jammed paper.
- Check whether the recording paper being used is within the specification.
- Check that recording paper are not curled, wrinkled or wet.
Step
1
Foreign materials in the duplex
print paper path
2
Registration actuator caught
on the surrounding parts
3
Registration sensor defective
4
Main PCB defective
Cause
Remove foreign materials.
Set the registration actuator into place.
Replace the registration sensor PCB ASSY.
Replace the main PCB ASSY.
2-23
LCD
Solution
Confidential
Advertisement
Table of Contents
Troubleshooting
