3.2 Creating New Group and Gateway
All Gateways on the network are now able to communicate with each other.
26
Getting Started
6. Setup Wizard (5/6):
a.
Do one of the following:
•
Click the "Use Default Password"
check box to accept the default User
Level Password ("user").
•
Clear the "Use Default Password"
check box, then type and confirm
the new password to change the
default password.
b.
Click [Next >].
7. Setup Wizard (6/6):
a.
Under "Select", click "Option 2".
b.
Under "Reboot access method", click
"RS232C".
Note: Make sure that the RS-232C Cable
cable is connected to the unit.
c.
Click [Finish].
MCS updates the setup information of
the unit. The unit reboot process can
take over a minute to complete.
A new Gateway is created.
8. Repeat steps 1 to 7 (through direct RS-232C
connection) for all Gateways to be added to
the Unit Group.