Miele CVA 6805 Operating And Installation Instructions page 95
Built-in coffee machine
Hide thumbs
Also See for CVA 6805:
- Operating and installation instructions (108 pages) ,
- Installation instructions manual (19 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
A faulty stainless steel hose must
only be replaced by a genuine Miele
replacement hose (available from
Miele or at www.miele-shop.com).
Make sure that the water hose is
suitable for food use.
Fitting the stainless steel hose
to the coffee machine
Make sure that the stainless steel
hose is not kinked or damaged. The
stainless steel hose must not be
shortened.
Remove the cover from the mains
water connection at the back of the
coffee machine.
Take the angled end of the stainless
steel hose and check whether there is
a washer. Fit one, if not.
Screw the coupling nut on the
stainless steel hose onto the
stopcock.
Ensure that all connections are
watertight.
Plumbed in water connection
Connection to the water inlet
Before making plumbing
connections, ensure that the
machine is disconnected from the
mains electricity supply.
Connection to the water supply should
be carried out by a qualified plumber
and should incorporate a stopcock with
a 3/4" threaded union.
Check whether there is a washer. Fit
one, if not.
Connect the stainless steel hose to
the stopcock.
Use the stainless steel hose supplied
with the machine. Old or used hoses
must not be connected to the coffee
machine.
Ensure that it is screwed into position
correctly.
Turn on the stopcock slowly and
check for leaks.
Correct the position of the seal and
union, if necessary.
Proceed with building in the coffee
machine (see "Installation").
95
- Quick Links:
- Problem Solving Guide
- Messages in the Display
Hide quick links:
Advertisement
Table of Contents
