Ethernet Information Setting Error Code - Hitachi HIDIC EH-150 Applications Manual
Programable controller; ethernet module(eh-eth)
Hide thumbs
Also See for HIDIC EH-150:
- Applications manual (117 pages) ,
- Instruction manual (29 pages) ,
- Applications manual (20 pages)
Table of Contents
Advertisement
5.2.8
Ethernet information setting error code
The list of error code of Ethernet information setting is shown in table 5.2.8.1.
Table 5.2.8.1 The list of error code during the IP address setting
Error
Display comment
Code
Operation mode: Is not Ethernet information
1001
setup mode.
Own station address: IP address is incorrect.
1101
Own station address: Subnet mask is
1102
incorrect.
Own station address: Default Gateway
1103
address is incorrect.
Own station address: IP address or Subnet
1104
mask is incorrect.
Routing information (No. n
1105
Subnet mask is incorrect.
Routing information (No. n
1106
is incorrect.
Routing information (No. n
1107
address is incorrect.
Test mode: IP address is incorrect.
1201
Test mode: Port No. is incorrect.
1202
TEST mode: Port No. is in conflict with ASR
1203
connection m.
Task code communication (No. p
1301
is incorrect.
Task code communication (No. 0): Timeout
1303
is incorrect.
Task code communication: Port No. conflict
1305
with ASR connection m.
*1: n should be in 1 to 6.
*2: p should be in 1 to 4.
Chapter 5 Configuration and procedure for starting communication
The position of dip switch is not for "Ethernet information
setting mode".
- Illegal value or character is set for IP address.
- "0.0.0.0" or "255.255.255.255" is set for IP address.
- Illegal value or character is set for Sub Net mask.
- The out of value of "255.0.0.0" to "255.255.255.248" is set
for Sub Net mask.
- Illegal value or character is set for Default Gate way
address.
- The out of value of "255.0.0.0" to "255.255.255.248" is set
for Sub Net mask.
"0.0.0.0" or "255.255.255.255" is set for IP address.
*1
): IP address or
- Illegal value or character is set for network address.
- The out of value of "0.0.0.0" to "255.255.255.255" is set
for Network address.
*1
): Subnet mask
- Illegal value or character is set for routing information.
- The out of value of "255.0.0.0" to "255.255.255.248" is set
for routing information.
*1
): Gateway
- Illegal value or character is set for gate way address in
routing information.
- The out of value of "0.0.0.0" to "255.255.255.255" is set
for gate way address in routing information.
"0.0.0.0" or "255.255.255.255" is set for IP address.
"0.0.0.0" or "255.255.255.255" is set for IP address.
Th port number of TEST mode and the port number of ASR
connection m
*2
): Port No.
Illegal value or character is set for task code port number.
Illegal value or character is set for task code time out
number.
The port number of task code and the port number of ASR
connection m
5-12
Causes
*1
is in coincidence(conflict).
*1
is in coincidence (conflict).
Advertisement
Table of Contents
