Copying, Deleting And Duplicating Files - Siemens SINUMERIK 840C Operator's Manual
Software oem version for windows
Hide thumbs
Also See for SINUMERIK 840C:
- Installation instructions manual (1154 pages) ,
- Diagnostics manual (260 pages) ,
- Installation manual (189 pages)
Table of Contents
Advertisement
6 Programming
Example
Note
6.2.4
Copying, deleting and duplicating files
Copying
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
You can define with status whether the system awaits an application feedback
when processing the job list or if processing of the job list is continued after
successful start of the application with the next instruction.
CALL
C:\OEM\PROG\CONVERT.EXE;WAIT
If an application for which the status = WAIT has been defined in the job list
does not give any feedback within a planned period of time, the following
alarm is displayed:
100203 Timeout when executingan application in the job list.
Machine manufacturer
For the MMC applications to be used on your machine tool, please refer to the
machine manufacturer's documentation.
Important
If a syntax error occurs in the job list, loading is interrupted with an error
message. If this is made by the data management, a dialog box is displayed
with the text of the defective line. If this is made via PLC, no dialog box is
displayed but the error message is sent directly to the PLC
The data manager on the SINUMERIK 840C provides functions for copying,
deleting and duplication for managing the files and directories of the MMC and
NCK areas in the familiar way.
The copy function is used to copy individual NC files from one workpiece to
another:
• Select the left-hand combo box with the EDIT key.
• Open the combo box with the RIGHT ARROW key.
• Use the ARROW keys to position the selection bar on the workpiece
containing the desired file ([shaft1] in the example: [motor]).
• Press the INPUT key. The workpiece is displayed in the combo box.
6FC5198-6AA60-0BP1
01.99
6-21
Advertisement
Table of Contents
