D-Link DGS 1210-28P Manual page 3

Pro dsx - hdmi over ip network switch configuration

Hide thumbs Also See for DGS 1210-28P:

Introduction:

Scope: This guide provides a reference for configuring your network switch to work with the

Octava PRO DSX HDMI Over IP Matrix System.

This configuration guide is based on the DLINK DGS1210-28P

In this guide we will configure the network switch so some of the advanced features are

enabled:

Jumbo frame : jumbo frames are Ethernet frames with more than 1500 bytes of payload.

Multicast Video: Multicast as compared to Unicast is a more efficient method of delivering

video to multiple clients. Multicasting requires only 1 "channel/group" to be transmitted

regardless of number of clients that will subscribe to the "channel/group". Unicast would

require 1 stream for each client , thus would increase the bandwidth requirement by N(

number of clients).

IGMP ( internet group management protocol): IGMP Querying/Snooping, optimizes

network loading by ensuring that Multicast traffic is only forwarded to ports that are

members of that Multicast group.