Table of Contents
Advertisement
Available languages
Available languages
9
of HKW-600 en, A31008-H6551-A102-1-4W28 (12.08.2004,
right page (
)
Initial operation
Establishing the first
connection with the
telephone
Note
For details of how to establish a Blue-
tooth connection, please refer to the
operating instructions for your phone.
• Activate the Car Kit's log-on
mode by a long press of
the
key.
• Activate your phone's Blue-
tooth interface and begin a
search on your phone for
Bluetooth devices in the area
that are ready to receive.
• When the Car Kit is found,
your phone will ask you to
type in a PIN number as
confirmation
• The PIN number is shown on
the Car Kit's display.
• After the confirmation the Car
Kit shows the identification of
the phone on the display and
then switches into stand-by
mode. For phones from other
manufacturers it is likely that
confirmation on the phone
will be required before the
switch to stand-by mode.
From then on, the Car Kit is
ready for use. The Car Kit and the
phone can communicate with
each other and will recognise
each other in the future.
Use with multiple phones
The Car Kit memorises the con-
nection of a maximum of four
phones with which it can be op-
erated alternately.
If a fifth phone is connected, the
entry for the phone which has
not been in contact with the
Car Kit for the longest period
will be deleted.
When the Car Kit is activated, it
searches for the last phone it
was connected with. If this is not
found, it searches for other
saved phones. Those it finds are
shown on the display. The user
can then select one of these.
9
Hide quick links:
Advertisement
Table of Contents
