Table of Contents
Advertisement
Available languages
Available languages
BVM series monitors
1
Turn the monitor upside down.
2
Remove the four legs from the bottom of the monitor,
and remove both left and right screws from the rear of
the monitor.
3
Attach the supplied two legs to the bottom of the
monitor, using screws D (4 × 16).
4
Turn the monitor upright and place the monitor on the
control unit with the stands attached.
Fit the rear of the monitor into the joints to join them
together.
16
Assembly
Screw D
Note
Protect the monitor from scratches as you manipulate
it around the joints.
5
Secure the monitor to the stand, using two screws B (4
× 8).
Note
When you fasten screws B to secure the monitor to the
stand, hold the monitor securely against the mounting
surface.
Joint
Screw B
Advertisement
Chapters
Table of Contents
