12
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
244
MAC-Based Groups
See
Table 1
for a description of the availability of this feature.
To assign a MAC address to a VLAN Group:
Click VLAN Management > VLAN Groups > MAC-Based Groups.
Click Add.
Enter the values for the following fields:
•
MAC Address—Enter a MAC address to be assigned to a VLAN group.
This MAC address cannot be assigned to any other VLAN group.
NOTE
•
Prefix Mask—Enter one of the following:
-
Host(48)—To include all bits of MAC address in the prefix mask (48 bits)
-
Length—Prefix of the MAC address
•
Group ID—Enter a user-created VLAN group ID number.
Click Apply. The MAC address is assigned to a VLAN group.
MAC-Based Groups to VLAN
See
Table 1
for a description of the availability of this feature.
Ports/LAGs must be in General mode.
To assign a MAC-based VLAN group to a VLAN on an interface:
Click VLAN Management > VLAN Groups > MAC-Based Groups to VLAN.
Click Add.
Enter the values for the following fields:
•
Group Type—Displays that the group is MAC-Based.
•
Interface—Enter a general interface (port/LAG) through which traffic is received.
•
Group ID—Select a VLAN group, defined in the
page.
•
VLAN ID—Select the VLAN to which traffic from the VLAN group is forwarded.
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
VLAN Management
MAC-Based VLAN Group Overview
VLAN Groups