Advertisement
[2] Charging using power cable 2
1) Insert one side of the power cable 2 into the power connector
2 on the right side of the BWC, the other side into the USB
port (type A) on the computer, etc.
2) Check that the amber charging LED is lit.
3) Full charging requires approximately 3 hours.
When the BWC is fully charged, the amber charging LED
switches off and the blue charged LED lights. To prevent
overcharging, disconnect the power cable 2 once charging is
completed.
Memo: Continuous operating time with a full charge
Continuous time
The continuous operating time varies according to the usage
environment, etc.
Note
Only use the included AC adapter to charge the BWC. Using AC adapters
other than the one specified at the left could damage the BWC.
An extremely short usage time on a full charge could indicate that the built-
in battery has reached the end of its service life. Contact your store of
purchase or a Toshiba service centre.
Approx. 5 hours
7
Advertisement
