Advertisement
Turning the slide switch on the back to the up, meanwhile long press the ④ and ⑤keys, LEDs is brightening and then off, ① keys is flash,
the remote is restored to the original state.
1 . Searching and adding new equipment in APP and Gateway also open the Zigbee mesh network.
①
2 . Turn the slide switch downward on the back,
keys is flash, which mean exit to network, if not, it's successful for accessing to network.
If can't access to network, pls restore to the original state.
Press ①、② and ③ keys which are equipment group, and then LED under button will brighten up. ⑤、⑥ Key for dimming,
④ Keys for ON/OFF .
Press ④、⑤、⑥ keys to control equipment and dimming.
Product configuration
01 Add Product
02 Select One Option
03 scan
05 Input MAC CODE
04 Search
07 Successful Adding
New product can be located after
Network overtime or searching failure
successful adding
warning,please check again
06 Select Zone
08 Adding Failure
Check Gateway and
enviromnent
1
compatibility
Check product power-on condition
2
Retry after few seconds
3
Advertisement
