Advertisement
Quick Links
Page 1 of 7
The NEC ML440 consists of the AP20 access point and the ML440 handset shown below.
The AP20 is powered by POE (802.3af) ONLY.
NEC
Status Lamp
See chart on
page X for
description
Some Quick ML440 Facts
• Maximum number of handsets is 200.
• Maximum number of AP's is 40.
• Seamless Roaming between AP's is supported.
• Single AP site supports up to 10 simultaneous calls.
A multi AP site supports up to 8 simultaneous calls.
• Voice Announce is NOT supported (there is no alert
Tone).
• ML440 uses NEC i-SIP so each handset requires one IP
Phone license (license 5101).
• ML440 only supports G711.
• ML440 does not work with UCB or Desktop Suite/Attendant.
• Maximum handsets that can register to one AP20 is 30.
• AP20 can be defaulted by depressing the small button on the rear side until the Status light turns red.
Page 1 of 7
ML 440
NEC
Soft Keys
Not
Programmable
Off
Hook
Speaker
Phone
SV8100 Cheat Sheet
NEC
. . .
3
1
2
ABC
DEF
5
4
6
GHI
JKL
MNO
8
9
7
TUV
PQRS
WXYZ
On
Hook
Menu
Key
Multi-
function keys
1~4 assigned
in Prog15-07
APT 1.0
Advertisement
Related Manuals for NEC ML 440
Summary of Contents for NEC ML 440
- Page 1 SV8100 Cheat Sheet Page 1 of 7 ML 440 The NEC ML440 consists of the AP20 access point and the ML440 handset shown below. The AP20 is powered by POE (802.3af) ONLY. Soft Keys Programmable Hook Hook Status Lamp Menu See chart on .
- Page 2 SV8100 Cheat Sheet Page 2 of 7 Programming 1. From default an IP address can only be assigned to the AP20 via DHCP. This can be done with the built in DHCP server on the SV8100 (10-13-01), via the customers DHCP server, or by using a 3 party application such at Tftpd32.
-
Page 3: Adding A Station
SV8100 Cheat Sheet Page 3 of 7 5. From the side menu select the option “Servers” to add the SV8100 IP Address. Enter the IP address from 10-12-09 along with :5080. Registration time(s) should be left at default. DTMF Signaling should be set to follow i -SIP SIP INFO... - Page 4 SV8100 Cheat Sheet Page 4 of 7 Once saved check the box and then select “Register Handset(s) . . . After selecting “Register Handsets(s)” take the first handset and press the “Menu” button. Left Right Enter Press “Down” to the icon and select “Enter”.
- Page 5 SV8100 Cheat Sheet Page 5 of 7 Adding a Station (Manual/Automatic) 12. Some systems may already be configured for Manual or Automatic Login. If this is the case the ML440 sets can be assigned with the following procedure. Within PCPro go to Programming, Unregistered Phones, IP Phone List… and select the ML440 extensions you intend to bring online.
- Page 6 SV8100 Cheat Sheet Page 6 of 7 Browse into the AP20 and perform steps 1~5 (pages 2 and 3 of this doc). Then select Network from the side menu to access the Network Settings. Go to the SIP/RTP Settings and change registration mode: Static Go back to the...
- Page 7 SV8100 Cheat Sheet Page 7 of 7 Multi-Cell Installation Most installations will require additional AP20’s to provide the wireless coverage of the customer’s working area. Each area the AP20 covers is called a “Cell”. Each cell must overlap another cell so that the calls in progress can be seamlessly passed between AP20’s as the handset moves between covered areas.