Branch Saw; Dismantling, Drive End; Bevel Gear, Cutting Attachment - Husqvarna 326 E Workshop Manual
Hide thumbs
Also See for 326 E:
- Operator's manual (24 pages) ,
- Operator's manual (28 pages) ,
- Operator's manual (24 pages)
Table of Contents
Advertisement
5
44
Bevel gear/Cutting attachment
Branch saw
Dismantling, drive end
Dismantle the chain, bar and the chain
sprocket.
Remove the drive disc, the chain sprocket
and the support washer.
Separate the drive disc and the chain
sprocket.
Inspect all parts.
Replace worn or damaged components
with new ones.
Position the drive disc (C) and the chain
socket (F) together. Press the rubber
plugs (E) into the respective opening.
Branch saw
Dismantling, drive end
Dismantle the chain and bar.
Remove the nut holding the chain sprock-
et and the cover plate (B) in place.
Brake the rotation by inserting a suitable
mandrel (A) through the drive disc and
into the gear housing.
Remove the drive disc (C) including the
chain sprocket.
Remove the support washer (D) from
inside the drive disc.
Press the drive disc and the chain sprock-
et apart using your thumbs.
Be careful not to lose the rubber plugs (E).
Inspect all parts.
Replace worn or damaged components
with new ones.
Position the drive disc (C) and the chain
socket (F) together. Press the rubber
plugs (E) into the respective opening.
Use a fl at pliers for instance to facilitate
assembly.
Hide quick links:
Advertisement
Chapters
Table of Contents
